Pyle PLBNPS11 Bedienungsanleitung

Pyle Subwoofer PLBNPS11

Lies die bedienungsanleitung für Pyle PLBNPS11 (2 Seiten) kostenlos online; sie gehört zur Kategorie Subwoofer. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 5 Bewertungen. Hast du eine Frage zu Pyle PLBNPS11 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/2
www.PyleUSA.com
PLBNPS18 - PLBNPS11 - PLBNPS12
Subwoofer Box System
Rear Vented Design
with Built-in Illuminating LED Lights
WIRING CONNECTION
Power amplier for schematic diagram.
Connect the power amplier to the positive
and negative terminals accordingly as shown.
REMOTE CONTROL FEATURES
1. Turn ON/Standby: Press this key to turn on LEDs or switch to standby mode.
2/9. Dynamic Mode button: Switch from dynamic mode to color mode or
switch between dynamic modes.
3/8. Dynamic Mode Speed button: Use these buttons to adjust dynamic mode
speed. If the unit is in static mode, pressing these buttons will switch unit to
dynamic mode.
4/5. Static Color Adjust button: Use this button to swit h between static colors.
Pressing these keys while in dynamic mode will switch the unit to static mode.
6/7. Brightness Adjust button: Pressing these buttons will adjust brightness
while in static mode. If these buttons are pressed while unit is in dynamic mode,
it will switch to static mode.
10. Demo Mode button: This button will switch the unit into demo mode.
While in demo mode, unit will loop through 9 of the dynamic modes with each repeating 3 times.
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
www.PyleUSA.com
PLBNPS18
8'' Single Series Vented Subwoofer Enclosure
Rear Vented Design with Built-in Illuminating LED Lights
Technical Specs:
Construction Materials: 15mm Particle Board + Multilayer Board
Power Rating: 400 Watts Max Power
Voice Coil: 1.5''
Impedance: 4 Ohms
Magnet: 30 Oz
Sensitivity: 89 dB
Frequency Response: 45-800 Hz
Remote Control Battery Operated, Requires (1) x CR2025’ Batteries
Battery Type: 3V Lithium Battery
Battery Life: Up to 2+ Hours
Product Dimensions (L x W x H): 17.3'' x 11.8'' x11.0'' -inches
PLBNPS11
10'' Single Series Vented Subwoofer Enclosure
Rear Vented Design with Built-in Illuminating LED Lights
Technical Specs:
Construction Materials: 15mm Particle Board + Multilayer Board
Power Rating: 500 Watts Max Power
Voice Coil: 2.0''
Impedance: 4 Ohms
Magnet: 40 Oz
Sensitivity: 90 dB
Frequency Response: 35-500 Hz
Remote Control Battery Operated, Requires (1) x CR2025’ Batteries
Battery Type: 3V Lithium Battery
Battery Life: Up to 2+ Hours
Product Dimensions (L x W x H): 18.1'' x 13.0'' x 12.6'' -inches
PLBNPS12
12'' Single Series Vented Subwoofer Enclosure
Rear Vented Design with Built-in Illuminating LED Lights
Technical Specs:
Construction Materials: 15mm Particle Board + Multilayer Board
Power Rating: 600 Watts Max Power
Voice Coil: 2.0''
Impedance: 4 Ohms
Magnet: 50 Oz
Sensitivity: 91 dB
Frequency Response: 25-300 Hz
Remote Control Battery Operated, Requires (1) x CR2025’ Batteries
Battery Type: 3V Lithium Battery
Battery Life: Up to 2+ Hours
Product Dimensions (L x W x H): 19.6'' x 14.1' x 14.5'' -inches
Features:
Rear Vented Design
High Powered Woofers
with a Silver Paper Cone
Rubber Edge Suspension
Smooth Carpet Finish
4 Layer Dual Voice Coil
Binding Post Connectors
Perfect for Truck and Behind the Seat
High-Quality Construction
What's in the Box:
• Subwoofer Box
• LED Remote Control


Produktspezifikationen

Marke: Pyle
Kategorie: Subwoofer
Modell: PLBNPS11

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PLBNPS11 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten