Pyle PLCM28MS Bedienungsanleitung
Lies die bedienungsanleitung für Pyle PLCM28MS (7 Seiten) kostenlos online; sie gehört zur Kategorie Kamera. Dieses Handbuch wurde von 10 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 5.5 Bewertungen. Hast du eine Frage zu Pyle PLCM28MS oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/7
VEHICLE REAR VIEW BACKUP CAMERA
Reverse / Parking Assist
License Plate Cam
with Night Vision
& Distance Scale Lines
l
1
Please read instructions carefully before installation and use.
Installation should be performed by a professional installer.
FEATURES:
● Universal Mount Vehicle Backup Camera
● Waterproof Rated & Weather-Resistant
● Marine Grade Camera Construction
● Mounting Options: Front or Rear Installation Support
● Built-in Distance Scale Lines for Reversing/Parking Assistance
● Compact, Slim Bar Camera Style
● Tilt Adjustable Camera Lens Angle
● True Color Reproduction and Image Adjustment
WHAT’S IN THE BOX:
● Backup Camera
● DC Power Cable
● RCA Video Cable
TECHNICAL SPECS:
● Video/TV System: NTSC
● Sensor: 1/4'' Color CMD
● Resolution: 420 TV Lines
● Eective pixel: 656 x 492 Pixels
● Marine Grade Rating: IP-67
● Low Lux Light Performance (0.2 LUX)
● Video Output: 1.0V PP-75 Ohm
● Viewing Angle: 170 Degree
● Power Supply: DC 12V, 200mA
● Current Consumption: Less than 10mA
● RCA Cable: 17 Foot Male to Male RCA Video Cable
●
Dimension (L x W x H): 10.0’’ x 0.7’’ x 1.3’’ -inches
● Weight: 0.72 lbs.
Wire Connection
Please hard wire the red positive wire connected to the round 1mm DC plug
(pictured below) to your reverse tail light positive 12V connection and the
black wire to the closest available ground. You will probably need a small
length of wire to reach from your reverse tail light to the DC plug.
2. This model is with license plate frame camera, so the unit can be installed
with the number plate.
There is the trajectory parking line function (the camera distance scale line
will be moving according to where the car moves, when car in reverse or
parking status). As the above 2 picture is shown.
3. Please plug the round 1 mm DC plug that you just wired to your reverse
tail light into the red (A) power connection (pictured above)
4. Use the included 5m video cable to connect the yellow video wire (B) to
your video monitor.
Attention: The camera switch is controlled by the reverse gear shift.
When you put your car in reverse, the camera will receive its 12V power
from the reverse tail light.
l2
Produktspezifikationen
| Marke: | Pyle |
| Kategorie: | Kamera |
| Modell: | PLCM28MS |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Pyle PLCM28MS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Kamera Pyle
7 September 2024
2 September 2024
6 August 2024
4 August 2024
1 August 2024
31 Juli 2024
30 Juli 2024
27 Juli 2024
27 Juli 2024
27 Juli 2024
Bedienungsanleitung Kamera
- Aida
- Lumens
- Blaupunkt
- Kodak
- Hoppstar
- Leitz Focomat IIc
- Daitsu
- Optoma
- Adeunis
- Arlo
- Fimi
- Marshall Electronics
- Watec
- Anker
- Powerfix
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025