Pyle PLCMTR92.5 Bedienungsanleitung
Pyle
Rückfahrkamera
PLCMTR92.5
Lies die bedienungsanleitung für Pyle PLCMTR92.5 (7 Seiten) kostenlos online; sie gehört zur Kategorie Rückfahrkamera. Dieses Handbuch wurde von 32 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 16.5 Bewertungen. Hast du eine Frage zu Pyle PLCMTR92.5 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/7
PLCMTR92.5
9'' Display Monitor (DC 12-24V for Bus, Truck, Trailer, Van)
Waterproof Rated Backup Camera & Monitor System
www.PyleUSA.com
PLCMTR - Commercial Grade Camera System
Please read instructions carefully before installation and use.
Installation should be performed by a professional installer.
To ensure your safety, the driver should not watch videos or operate features on the
monitor while driving. There are no serviceable parts in this unit, do not disassemble or try to
repair this unit. If the unit malfunctions please return to your vendor or send to a Pyle repair
facility. Please observe and obey the local laws and regulations when installing the unit.
Upon Installation, please make sure as to not to interfere with any of the vehicle's safety
features, wiring, components, etc. We are not responsible for any damages, injury,
malfunctions or otherwise noted due to faulty or non-professional installation.
Connection
Connect the camera's threaded locking 4-pin cable connectors into the female receiving
connection of the included 4-pin extension cable. The extension cable then connect to
your compatible video monitors with 4-pin receiving connector. The threaded locking
cable connectors of the camera serve to provide power and video for the camera.
Please remember to disconnect your vehicle's battery prior to any connection / installation.
Use the included wiring harness to provide power and video signals to your monitor.
There are colored wires to assist in the video camera system setup.
See the wiring diagram for connections between cameras, monitor and your vehicle
2
When turning the vehicle's ignition key or turning to the accessory or ON
position, power is supplied to the camera system through the control box and
the monitor will be in stand-by mode.
www.PyleUSA.com
3
PLCMTR - Commercial Grade Camera System
Wiring & Connection Camera
(4-Pin Connection)
Red: Power 12/24V
Black: GND
Green: +12V Reverse
*For additional information visit www.PyleAudio.com
Video
Connectors
Display Monitor
Power &Video
Wiring Harness
POWER: DC 12V
GND
+12V Reverse
*When the Green - Reverse Trigger - is connected, the
system will automatically revert to this connection
once the vehicle is placed into reverse gear. This is
connected to the camera via 4-Pin connection.
*The monitor control allow the user
to adjust picture settings horizontal
or vertical based on the mounting
location of the camera.
*Please note: The monitor may
include a 'volume' function in the
menu settings. This feature is not
available for this model.
Produktspezifikationen
| Marke: | Pyle |
| Kategorie: | Rückfahrkamera |
| Modell: | PLCMTR92.5 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Pyle PLCMTR92.5 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Rückfahrkamera Pyle
26 August 2024
20 August 2024
10 August 2024
7 August 2024
7 August 2024
6 August 2024
5 August 2024
2 August 2024
1 August 2024
31 Juli 2024
Bedienungsanleitung Rückfahrkamera
- Trebs
- AEG
- XOMAX
- Kenwood
- CRUX
- Boyo
- AutoXtreme
- Conrad
- Tracer
- MarQuant
- XZENT
- Waeco
- Dometic
- CARMATRIX
- Hikvision
Neueste Bedienungsanleitung für -Kategorien-
19 September 2024
7 September 2024
7 September 2024
7 September 2024
7 September 2024
5 September 2024
3 September 2024
2 September 2024
2 September 2024
2 September 2024