Pyle PLG6C Bedienungsanleitung

Pyle Lautsprecher PLG6C

Lies die bedienungsanleitung für Pyle PLG6C (1 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Pyle PLG6C oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/1

INSTALLATION MANUAL

INTRODUCTION

PLG5C

PLG6C

www.PyleUSA.com

CONGRATULATIONS!

YOU HAVE PURCHASED ONE OF THE FINEST CAR AUDIO PRODUCTS AVAILABLE TODAY.

PLG-SERIES SPEAKER IS A STATE OF THE ART PRODUCT CAREFULLY DESIGNED

& MANUFACTURED FOR VEHICLE USE,AND HAS BEEN THOROUGHLY TESTED TO ENSURE

CONSISTENT AND RELIABLE PERFORMANCE.

1.Using mounting template for speaker,mack the

correct mounting loction by a pencil or pen.

2.Cut out the panel by this marking and drill 4

holes for the mounting bolts to pass through.

3.Separate the punching metal from the grill

frame.

4.Connect the terminal of speaker to car audio

correctly by using cord provided.

5.Insert grill frame & speaker Unit in the speaker

mounting hole at the rear panel and fix speaker

with bolts & screw & nuts provided.

6.Put the purching metal back with the grill

frame.

Caution:Be careful not to misconnect polarity.

MOUNTING INSTRUCTIONS

MIDWOOFERS

WIRING INSTRUCTIONS

TEMPLATE

1.Assmble each parts as above method.

Put the tweeter unit into bracket

and rotate clock-wise unit the

bracket.

1.Assmble each parts as above method.

Put the tweeter unit into bracket

and rotate clock-wise unit the

tweeter unit is locked to the

bracket.

TWEETER

3.Push the assembled tweeter into

the hole after connecting each wires.

2.Before screwing up the bracket,

investigate the layout of your

automobile thoroughly.This it to

check whether there is enough space

for screw in behind and to check

whether there is no electrical wiring in

behind. Take care when working near

to the petrol line or hydraulic lines

and electrical wiring.

2.Make 45mm diameter hole where

you want to install.Before cutting

hole,investigate the layout of

check whether there is no electrical

wiring in behind.Take care when

working near to the petrol line or

hydraulic lines and electrical

wiring.

Frequency Response: 1.3K-22k Hz

Power Handling: 100 Watts

Nominal Impedance: 4 Ohms

SPL: 92 dB

PLG5C MIDWOOFER

PLG5C MIDWOOFER(115mm)/PLG6C MIDWOOFER(142mm)

PLG6C MIDWOOFER CUTOUT

PLG5C MIDWOOFER CUTOUT

Frequency Response: 60-6k Hz

Power Handling: 300 Watts

Nominal Impedance: 4 Ohms

SPL: 89 dB

PLG6C MIDWOOFER

Frequency Response: 50-5k Hz

Power Handling: 400 Watts

Nominal Impedance: 4 Ohms

SPL: 91 dB

TWEETERS

SURFACE MOUNT

SPECIFICATIONS

FLUSH MOUNT

PLG5C/PLG6C/147*217mm/80g双铜/8页

Produktspezifikationen

Marke:	Pyle
Kategorie:	Lautsprecher
Modell:	PLG6C
Impedanz:	4 Ohm
Lautsprecher:	4
Frequenzbereich:	50 - 5000 Hz
Hochtöner:	Ja
Subwoofer enthalten:	Nein
Hochtönerdurchmesser:	12.7 mm
Lautsprechertyp:	2-Wege
Bemessungsleistung:	200 W
Treiberdurchmesser Mitteltöner:	165.1 mm
Spitzenstrom:	400 W
Unterschiedliche Bestandteile:	Ja
Montagetiefe:	67.31 mm
Tweeter Magnettyp:	Neodym
Mittelbereich Lautsprecher Magnettyp:	Neodym