Pyle PLMRF65MW Bedienungsanleitung
Pyle
Lautsprecher
PLMRF65MW
Lies die bedienungsanleitung für Pyle PLMRF65MW (3 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 41 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 21 Bewertungen. Hast du eine Frage zu Pyle PLMRF65MW oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/3
PLMRF65MB
PLMRF65MW
PLMRF65MW / PLMRF65MB
Dual 6.5’’ Waterproof-Rated Bluetooth Marine Speakers
2-Way Coaxial Full Range Amplied Speaker System with Wireless RF Streaming (600 Watt)
Features:
• Includes (2) 6.5'' Coaxial Speakers (Active + Passive)
• Bluetooth Wireless Music Streaming Ability
• Wireless Radio Frequency (RF) Streaming Ability
• RF Audio Module Supports Additional Speaker
Connectivity
• Extended Range Streaming Performance
• Marine Grade Waterproof-Rated Construction
• Water-Resistant & Weatherproof Design
• Amplied Master Speaker with Built-in 2-Ch.
Digital Amplier
• 2-Way Active Powered Speaker System
• Impressive Wide-Bass Response
• Full Range Stereo Sound Reproduction
• Universal Standard OEM Replacement Size
• RCA Audio Aux (L/R) Connectors
• Hassle-Free Easy Access Speaker Terminals
• Daisy-Chain Ability (Active to Passive Speaker)
as Stereo System
• *Each Speaker Has the Ability to Serve as a Passive
Type Speaker
• Reinforced Surround with Dense Speaker Cone
• Rugged Machined Basket & Grill
with UV Resistant Housing
• Used For Car, Boat, O-Road & Marine Vehicle Applications
Technical Specs:
• Power Output: 600 Watt MAX (300 Watt RMS)
• Marine Grade Rating: IP-X4
• Speaker Composition: Polypropylene Cone,
Butyl Rubber Surround
• Voice Coil: 1.0'', Aluminum (x2)
• Tweeters: 0.5'', Neodymium Dome (x2)
• Impedance: 4 Ohm
• Sensitivity: 90 dB
• Circuit Magnet: 20 oz.
• Frequency Response: 85Hz-20kHz
• Active Speaker Weight: 1.71 lbs.
• Passive Speaker Weight: 1.67 lbs.
• Power Supply: DC 12V
• Sold as: Kit
What’s in the Box:
• (1) 6.5’’ -inch Active Speaker
• (1) 6.5’’ -inch Passive Speaker
• Cut-Out Template
• Mounting Screws
Bluetooth Connectivity:
• Receiver Built-into Active / Master Speaker
• Allows Instant Wireless Music Streaming
• Simple Setup & Hassle-Free Pairing Ability
• Works with All of Today’s Latest Devices
(Smartphones, Tablets, Laptops, Computers)
• Bluetooth Version: 4.2
• Bluetooth Network Name: ‘PyleUSA’
• Wireless Range: 30’+ ft. BT
(100’+ ft. RF Streaming)
Sizes / Dimensions:
• Total Diameter: 6.9’’ -inches
• Cut-Out Diameter: 6.75’’ -inches
• Total Depth: 3.97’’ -inches
• Mounting Depth: 3.1’’ -inches
www.PyleUSA.com
Dual 6.5’’ Waterproof-Rated Bluetooth
Marine Speakers
2-Way Coaxial Full Range Amplied Speaker System
with Wireless RF Streaming (600 Watt)
PLMRF65MW - PLMRF65MB
www.PyleUSA.com www.PyleUSA.com
PLMRF65MW - PLMRF65MB
Installation Guide
PLMRF65MW/PLMRF6MB Installation
Ways to Connect
• RF Wireless Audio Connection:
Install both speakers, as active powered speakers. Connect L and R Channel speakers, each to a 12V
power source. Then use pins to press the " " buttons, simultaneously to pair the speakers. CH Set
Upon successful power connection, the R Channel speaker LED indicator light will shine red -- and the
L Channel speaker LED indicator light will shine blue.
*Note: Recommended power installation should include a 10 amp fuse between the power source
and speakers, ensure a proper and adequate power connection is established.
Bluetooth Audio Connection:
Once the speakers are installed and powered, the Bluetooth network name from your device list will
appear as 'PyleUSA'. Upon successful Bluetooth pairing connection you will hear a connection tone
and the speakers will shine with a blue LED indicator light.
Aux-in (External Audio Source) Connection:
The R Channel speaker features low-level audio input connectors to stream audio from external
devices. Upon successful aux audio input connection, the R Channel speaker LED indicator light will
shine green.
*Note: The speakers must not be paired via Bluetooth wireless connection to allow Aux-in audio
mode.
Passive Speaker Connection:
Each speaker also has the ability to be used as a Passive-Type (un-powered) speaker. Ensure a proper
audio source connection is made via each speaker's 'Input Radio Speakers' connectors.
LED INDICATOR
Status
POWER ON
RCA AUX-IN Connection
Bluetooth Connection
Main Speaker ( R Channel) 2nd Speaker (L Channel)
BLUE
RED
GREEN
RED
BLUE
BLUE
BLUE
RED
RF Wireless Connection
I
II
III
II
Signal connection
as passive speaker
Signal connection
Using pins to push “CH Set” simultaneously
to get RF Wireless connection
as passive speaker
Audio Signal
Aux-In
(Follow on
Ways to Connect
)
III
(Follow on
Ways to Connect
)
III
“ Bluetooth
Pairing Tone”
1.“Turn on Bluetooth”
2.“Choose PyleUSA”
I
CH Set CH Set
Produktspezifikationen
| Marke: | Pyle |
| Kategorie: | Lautsprecher |
| Modell: | PLMRF65MW |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Pyle PLMRF65MW benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Lautsprecher Pyle
4 Juni 2025
4 Juni 2025
15 Oktober 2024
14 Oktober 2024
5 Oktober 2024
5 Oktober 2024
4 Oktober 2024
24 September 2024
20 September 2024
19 September 2024
Bedienungsanleitung Lautsprecher
- JB Systems
- Exibel
- Vogel's
- ECG
- Parrot
- Insignia
- DreamGEAR
- Monacor
- Asus
- Stereoboomm
- Sharper Image
- Watson
- Schneider
- SBS
- Viking
Neueste Bedienungsanleitung für -Kategorien-
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
14 Juni 2025
14 Juni 2025