Pyle PLPTS25 Bedienungsanleitung

Pyle Mikrofon PLPTS25

Lies die bedienungsanleitung für Pyle PLPTS25 (1 Seiten) kostenlos online; sie gehört zur Kategorie Mikrofon. Dieses Handbuch wurde von 33 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 17 Bewertungen. Hast du eine Frage zu Pyle PLPTS25 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/1
Laptop Computer Stand For DJ
PLPTS25
www.PyleUSA.com
NOTE:The Stabilizer Bars be MUST
positioned at least 2 holes apart.
PREPARATION:
Remove the following parts from the box and identify all the parts:
(2) Upper Supports (2) Lower Supports
(2) Stabilizer Rods
(4) Screw Knobs
ASSEMBLING INSTRUCTIONS
1. Start by removing the end caps from
the two stabilizer rods.
2. Assemble the left/right support brackets.
Take one side of the upper supports and
match it with the corresponding side
lower support (the lower supports
feature an anti-slip grip pad on the
bottom) - Figure A.
Align the mounting holes at the desired
height and position the Screw Knobs
through the supports (ensure not to
over-tighten). -Figure B.
3. Repeat steps 1 & 2 above to assemble
the other side of the stand's support
bracket aligning the correct heights
of the stabilizer rods.
Figure A
Figure B


Produktspezifikationen

Marke: Pyle
Kategorie: Mikrofon
Modell: PLPTS25

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PLPTS25 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten