Pyle PLUTV43BTA Bedienungsanleitung

Pyle Lautsprecher PLUTV43BTA

Lies die bedienungsanleitung für Pyle PLUTV43BTA (4 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 18 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 9.5 Bewertungen. Hast du eine Frage zu Pyle PLUTV43BTA oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
4 Waterproof Rated Off-Road
Wireless BT Streaming Speakers
Amplied Vehicle Speaker System
for ATV, UTV, 4x4, Jeep (800 Watt)
PLUTV43BTA
P l USA
2
PLUTV43BTA Installation
1. To avoid potential shorts in the electrical system, be sure to disconnect the ( ) battery cable-
before installation. Use this unit with a 12-Volt battery and negative grounding only.
Failure to do so may result in a re or malfunction.
2. Speaker Mounting suggestion as below:
Step 1: Unbolting the mounting bracket
Step 2: Slide in the buckle with rubber pad attached to the bracket stand of the speaker
Attach the set to handle bar of vehicle / ship
Step 3/4: Attach screw to lock the buckle
Step 5: Using accessories of Butt Connector to Connect Speaker wires (See Illustration )1
Step 6 : Using accessories of Butt Connector to Connect Power Cable (See Illustrations )2
Rubber Pad
Blue
Blue
yellow
yellow
+ +
-
-
black
Red
AUX
IN
1
Blue
yellow
+
+
- -
BlackRed
Blue
yellow
+
-
+
-
Power
AUX IN
2
P l USA
3
PLUTV43BTA
4’ Waterproof Rated O-Road Wireless BT Streaming Speakers
Amplied Vehicle Speaker System for ATV, UTV, 4x4, Jeep (800 Watt)
Features:
Pro Audio PowerSport Speakers
Amplied (Active + Passive) Speaker System
Bluetooth Wireless Music Streaming Abiltiy
Bridged Sound System: (2) x 4.0'' Woofers + (2) x 0.5'' Tweeters
Marine Grade Waterproof Rated Construction
Weatherproof & Water-Resistant Housing
2-Way Full Range Stereo Sound Reproduction
Built-in Digital Sound Processing Amplier
Integrated Speaker Power & Wiring Harness
Compact Size & High-Powered Output
Impressive Bass Response
Aux (3.5mm) Input Jack
Connect & Stream Audio from External Devices
Sleek Design, Machine Molded Speaker Cabinet Housing
Rugged, Universal Mount Bracket Design for Roll-Bar / Roll-Cage
Used for O-Road Outdoor Vehicles: ATV, UTV, 4x4, Jeeps, Marine Watercraft
Bluetooth Connectivity:
Simple & Hassle-Free Pairing
Instant Wireless Audio Streaming Ability
Works with All of Today’s Latest Devices
Smartphones, Tablets, Laptops, etc.
Technical Specs:
Speaker Power: 800 Watt MAX
Amp Power: 2 x 250 Watt MAX @ 4 Ohms (2 x 125 Watt RMS)
Amp Type: 2-Channel, Class D
Marine Grade Waterproof Rating: IP-X5
Speaker Type: Polypropylene Cone, Butyl Rubber Surround (x2)
Tweeter Type: Neodymium Dome (x2)
Frequency Response: 85Hz-20kHz
Impedance: 4 Ohm
Magnet Type: 20 oz. Circuit
Mid-Woofer Voice Coil Type: 1.0'', Aluminum
Sensitivity: 90 dB +/- 2 dB @ 1M/1W
Anti-Thump Turn-On
Soft Turn On/O
T.H.D: <0.05%
S/N Ratio: >95dB
Channel Separation: >65dB
Amp Freq. Response: 10Hz- 30kHz
Fuse: 1 x 10A
Universal Mounting Brackets Roll-Bar / Roll-Cage Diameter: 1.25’ ~ 2.0’ -inches
Speaker Dimensions (L x W x H): 5.62’ x 8.38’ x 7.29’ -inches, with Bracket (Each)
Power Supply: DC 12V
Sold as: Kit
What’s in the Box:
(1) 4'' Amplied Main Speaker
(1) 4'' Passive Support Speaker
Speaker Connection Wires, 6.5' ft.
Wire Butt Connectors, 16-22 AWG
EVA Mounting Pads
Bluetooth Version: V4.2
Bluetooth Network Name: ‘PYLEUSA
Wireless Range: 30+ ft.
* Bluetooth Receiver Module Built-Into Amplier
of Main / Active Speaker


Produktspezifikationen

Marke: Pyle
Kategorie: Lautsprecher
Modell: PLUTV43BTA

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pyle PLUTV43BTA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten