Pyle PT110 Bedienungsanleitung
Lies die bedienungsanleitung für Pyle PT110 (14 Seiten) kostenlos online; sie gehört zur Kategorie Empfänger. Dieses Handbuch wurde von 47 Personen als hilfreich bewertet und erhielt im Schnitt 3.5 Sterne aus 24 Bewertungen. Hast du eine Frage zu Pyle PT110 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/14
80 Watt AC/DC Microphone
PA Mono Amplifier with USB/SD/FM/BT
PT110
LED Level Display w/ 70V Output & Mic Talkover
www.PyleUSA.com
2
INTRODUCTION
Your New PYLE PT110 PA AMPLIFIER gives you the power and versatility you
need in a professional sound system. The amplier's wide frequency response
makes it suitable for amplifying music or vocal program material. It can be used
for live bands, oce paging systems, public announcements, or a variety of
other installations. Please read this manual throughly before you attempt to
set up and use the amplier. It contains a range of installation suggestions as
well as instructions to ensure safe usage. Installed properly, you can expect
years of trouble-free service from this product.
FEATURES AND CONTROLS
FRONT PANEL
REAR PANEL
1. POWER SWITCH: Press to switch the power unit ON or OFF.
2. Connect a pair of stereo headphones for private listening or Phone Jack:
cueing (monitoring) sound prior to “airing” it.
12
4
3 8 5 6 7
910 11
15 1816172214
12
13
20
19 21
www.PyleUSA.com 3
3. MIC 1 & MIC 2 Jack: Allows you to connect up to two 6.35mm type microphone.
4. LED Level Display Meter
5. MIC Volume Control: Lets you adjust the MIC1/MIC2 sound level.
6. Three Input Sources Mixing Controls: Controls the sound level for each of the
audio input sources.
PHONO/AUX: Select and connect an alternative high level (AUX/CD) or low level
(PHONO) audio sound source.
7. 100 Hz, 1 kHz, & 8 kHz Equalizer Controls: To enhance the sound or tailor the
high, midrange, and low frequencies for each audio source input to the acoustics
of a particular performance environment, you can adjust these equalizer tone
controls.
8. AUX Input Jack: Allows you to connect any high level sound source, such as a
CD player, tape deck, or tuner, to the CD/AUX jack.
9. CONTROL PANEL BUTTON
These buttons are only used to control the USB/SD, Wireless BT and FM A.
functions and doesn’t control other functions.
Press this button to select one from USB/SD mode, FM mode B. MODE BUTTON:
or Wireless BT play mode. USB/SD mode will be set automatically after turning
ON the unit. Automatically plays mp3 les after inserting a USB ash drive or
SD card. You cannot select AUX, CD and DVD input on this button.
Each press of the PLAY/PAUSE BUTTON causes the operation to change from C.
play to pause or from pause to play in the USB/SD mode or Wireless BT mode.
Press the PLAY/PAUSE BUTTON one time to auto scan all frequencies from
87.5MHz to 108MHz in FM mode Press the button to auto scan channels when
you use FM radio for the rst time. After stop searching, the unit will auto
store all the radio channels and play from the rst radio channel. You don't
need to rescanevery FM radio start up.
Use these two buttons to select previous or next D. PREV and NEXT BUTTON:
track, depending on these dierent modes as below.
• In USB/SD mode: Use to select previous or next track.
• In Wireless BT mode: Use to select previous or next track.
• In FM mode: Use to select previous or next radio channel.
10. Show MP3/SD/BT/FM information.LED Display:
11. USB Port and SD card socket: After inserting a USB ash drive/SD Card into
the input terminal, then press the mode button to choose between audio from
the USB port, SD Card input, Wireless BT or FM radio. If you want to use the
Wireless BT, check the below steps.
Produktspezifikationen
| Marke: | Pyle |
| Kategorie: | Empfänger |
| Modell: | PT110 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Pyle PT110 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Empfänger Pyle
22 September 2024
14 September 2024
11 September 2024
6 September 2024
5 September 2024
3 September 2024
1 September 2024
1 September 2024
31 August 2024
31 August 2024
Bedienungsanleitung Empfänger
- Kanto
- Palmer
- VMV
- Sommer
- Williams Sound
- Grundig
- Cloud
- ART
- Martin Logan
- Speco Technologies
- IOTAVX
- Phoenix Audio
- RCF
- Artsound
- Kali Audio
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025