Qtx VHN2 Bedienungsanleitung

Qtx Mikrofon VHN2

Lies die bedienungsanleitung für Qtx VHN2 (6 Seiten) kostenlos online; sie gehört zur Kategorie Mikrofon. Dieses Handbuch wurde von 41 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 21 Bewertungen. Hast du eine Frage zu Qtx VHN2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/6

V-SERIES

VHF Wireless Systems

User Manual

Version 3.3

Caution: Please read this manual carefully before operating

Damage caused by misuse is not covered by the warranty

V-Series VHF Wireless User Manual

Introduction

Thank you for choosing the QTX Soun -series wireless system. This professional wireless set provides a high quality d VHF

microphone with VHF radio system for freedom of movement without loss of audio quality. Please read this manual

before using this equipment in order to avoid damage through incorrect operation and to get the best performance from

your purchase.

Contents:

Please take care when unpacking this product. Inspect for any damage and ensure you have the following components…

• VHF wireless receiver

• Mains power adapter

• 6.3mm mono jack lead

• 9V battery, PP3 (2 pieces for VH2, VN2 or VHN2)

• Microphone / transmitter(s) see table below –

Model

Stock code

Microphone 1

Microphone 2

VH1

171.804 UK

Handheld transmitter

VH2

171.816 / 171.817 UK UK

Handheld transm ter it

Handheld transmitter

VN1

171.836 / 171.837 UK UK

Neckband mic. + beltpack

VN2

171.818 / 171.819 UK UK

Neckband mic. + beltpack

VHN2

171.810 / 171.811 UK UK

Handheld transmitter

Neckband mic. + beltpack

VL1

171.834 / 171.835UK UK

Lavalier mic. + beltpack

Warning

To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.

If liquids are spilled on any component, stop using immediately, allow unit to dry out and have checked by qualified

personnel before further use.

Avoid impact or heavy vibration to any of the components, dropping the microphone can cause capsule failure.

No user serviceable parts inside transmitter or receiver - refer servicing to qualified servi personnel. ce

Safety

• Ensure that the correct adapter is used with adequate current rating and that the mains voltage is as stated on the

adapter.

• Avoid ingress of water or particles into the transmitter(s) or receiver

• Use alkaline or NiMH batteries i the transmitter(s) and remove if unused for long periods. n

• Observe the correct polarity when replacing batteries

Placement

• Keep all components out of direct sunlight and away from heat sources.

• Do not place heavy objects on top of the receiver or tr smitter(s) an

• If rack-mounting, secure the receiver to a 1U rack tray and do not place heavy equipment above the receiver.

• Keep the transmitter(s) and receiver away from damp or dusty environments.

Cleaning

• Use a soft cloth with a neutral detergent to clean the body of the microphone/transmitter and receiver.

• Lightly damp sterile wipes may be used on the microphone grille for hygiene purposes

• To avoid damage, do not use solvents to clean the components

V-Series VHF Wireless User Manual

Handheld Transmitter Beltpack Transmitter

Receiver Rear Panel

Receiver Front Panel

1. Windshield

2. Slide switch and LED

3. Battery compartment cover

1. Antennas

2. DC power input

3. 6.3mm jack output

4. XLR output

1. Power /OFF switch ON

2. Channel A volume control

3. Channel A indicator LED

4. Power indicator LED

5. Channel B indicator LED

6. Channel B volume control

1. Volume control

2. Slide switch and LED

3. 3.5mm mic hone input jack rop

Produktspezifikationen

Marke:	Qtx
Kategorie:	Mikrofon
Modell:	VHN2
Mikrofon-Typ:	Tragbares/Headset-Mikrofon
Verpackungsbreite:	320 mm
Verpackungstiefe:	430 mm
Verpackungshöhe:	100 mm
Paketgewicht:	570 g
Kabellose Reichweite:	50 m
THD, totalklirren:	0.2 %
Anzahl unterstützter Akkus/Batterien:	1
Rauschverhältnis (SNR):	85 dB
Receiver Typus:	Stationärer Empfänger
XLR-Out:	1
Netzteil enthalten:	Ja
Empfängerdimensionen (B x T x H):	45 x 210 x 180 mm
Empfängergewicht:	573 g
Mikrofongewicht:	190 g
Transmitter-Abmessungen (BxTxH):	205 x 68 x 25 mm
Gewicht Transmitter:	76 g
6,35 mm (1/4-Zoll) Ausgang:	1
Betriebsspannung (Empfänger):	10 V
Stromverbrauch (Empfänger) (max.):	250 mA
Receiver-Display:	Nein
Transmittertyp:	Handsender
Sender-Display:	Nein
Anzahl der enthaltenen Sender:	2
Anzahl der enthaltenen Empfänger:	1
Anzahl enthaltener Mikrofone:	2
Funkfrequenzbereich (RF):	174.1 - 175 MHz
Betriebsfrequenzart:	Sehr hohe Frequenz (VHF)
Art der Mikrophon-Stromversorgung:	Akku