Radial Engineering JDX Bedienungsanleitung
Lies die bedienungsanleitung für Radial Engineering JDX (12 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Radial Engineering JDX oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/12

True to the Music
www.radialeng.com
®
True to the Music
®
User Guide
JDX
™
500 Reactor
Amplifier Direct Box & Cabinet Emulator
500 Series Module
www.radialeng.com
Radial Engineering Ltd.
1588 Kebet Way, Port Coquitlam
British Columbia, Canada, V3C 5M5
tel: 604-942-1001 • fax: 604-942-1010
email: info@radialeng.com

WARNING NOTICE TO USER!
The Radial JDX 500 is not a load box. This means that if you are using it with a guitar
amplifi er it must be connected to a speaker cabinet or some type of load box. Failure
to do so could result in damaging the JDX and your amplifi er which of course would not
be covered under warranty. Always ensure you have proper cables and connections
have been checked. We recommend using high quality 12 gauge speaker cables.
Because the JDX 500 can also be used as a direct input from a guitar, we have
instituted a slow fl ashing LED to let you know when you are in this mode. This safety
measure reminds you that you should not connect a guitar amplifi er output to the JDX
when in guitar mode as this may damage the JDX.
Although preventative safety measures have been designed into Radial 500 series
products we strictly advise against hot-swapping modules or plugging and
unplugging them when the Workhorse or other 500 series rack is powered on. Hot
swapping can cause connection sparks at the card-edge connector that could send
damaging transients to other equipment. This also greatly reduces the life span of the
contacts. Damage due to hot swapping is not covered under warranty. There are no
user serviceable parts inside.
Radial
®
JDX
™
500 Reactor
User Guide
Table of Contents ......................................................Page
Feature Set .................................................................... 1
Overview ........................................................................ 2
Function Details ............................................................. 4
Getting Started ............................................................... 5
Amp Mode ...................................................................... 6
Guitar Mode ................................................................... 7
Re-amping and Other Applications ................................ 8
Specifi cations ................................................................. 9
Block Diagram ................................................................ 9
Warranty ........................................................... Back cover
Congratulations and thank you for purchasing the Radial JDX 500 Reactor module. The
JDX is a unique 500 series amplifi er interface designed to capture the dynamic relationship
between an amplifi er and speaker cabinet while also offering direct instrument recording with
active speaker cabinet emulation.
This manual describes installing and operating your JDX 500 in the Radial Workhorse or
other 500 series module power racks. To take full advantage of the unique features that
have been incorporated into the JDX 500, please read through this manual before using
it. This user guide will give you a broader sense of the module’s capabilities. If you have
questions that are not covered in this manual, please visit the FAQ section on our website.
This is where we post answers to questions from users. If you cannot fi nd the answer to your
question please feel free to send an email to info@radialeng.com and we will do our very
best to respond as quickly as possible.
The JDX 500, one small step for audio engineering, one huge leap for tone fanatics!

True to the Music
®
Radial Engineering Ltd.
JDX 500 Module
FEATURE SET
1. 180º REVERSE - Inverts the signal polarity
between 0° and 180°.
2. LIFT - Ground lift switch works with the
transformer isolation to help eliminate hum
and buzz caused by ground loops.
3. LPF TONE SHIFT - Low pass fi lter control,
rolls off the high end to tame the aggressive
edge from overly bright sounding amps.
4. LF-EXT - Low frequency extension, lowers
the bass frequency response to emulate the
sound of a 15” speaker for added bass.
5. GUITAR - Toggles the front panel 1/4” jacks
between “amp mode” and “guitar mode”.
When set to “guitar mode” (inward position)
instruments may be connected directly
to the 1/4” HEAD jack. The LED indicator
fl ashes when “guitar mode” is engaged.
Do not connect an amplifi er when the LED
is fl ashing. Read the user warning notice
before using this feature.
6. 300W - Reduces the input sensitivity to allow
high-power guitar and bass amps to be used
with the JDX.
7. 1/4” HEAD JACK - Used to connect amps or
instruments depending on the position of the
GUITAR switch. When the JDX is in “amp
mode” this jack connects the speaker output
of an amplifi er. When the JDX is set to “guitar
mode” instrument may be connected directly
to this jack. Read the user warning notice
before using this feature.
8. 1/4” SPEAKER JACK - Used to connect a
speaker cabinet when JDX is used with
an amplifi er. The JDX is not a load box.
Therefore, it must be connected to a
speaker or load box when used with a
guitar amp.
9. OMNIPORT - When installed in the Radial
Workhorse rack you will have access to the
Omniport ¼” TRS jack. The JDX Omniport
is an alternative output set up as a balanced
mic-level direct box to feed a microphone
preamp, snake system or mixing console in
a live touring setup.
8
7
1
4
3
2
6
5
Rear Panel
1
9
Produktspezifikationen
Marke: | Radial Engineering |
Kategorie: | Nicht kategorisiert |
Modell: | JDX |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Radial Engineering JDX benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Radial Engineering
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
21 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- GPX
- Tumbleweed
- Dirt Devil
- Aprilia
- ClimeMET
- Eurochron
- Exalux
- Mach Power
- Steiner
- Noveen
- Praktica
- Juniper
- APSystems
- Itho Daalderop
- Stages
Neueste Bedienungsanleitung für -Kategorien-
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025