Radial Engineering JS3 Bedienungsanleitung
Lies die bedienungsanleitung für Radial Engineering JS3 (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 2 Bewertungen. Hast du eine Frage zu Radial Engineering JS3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/6
www.radialeng.com
JS•3
3-Way Microphone Splitter
Users Guide
Radial Engineering Ltd.
1845 Kingsway Ave., Port Coquitlam, BC V3C 0H3, Canada
Tel: 604-942-1001 • Fax: 604-942-1010
email: info@radialeng.com
Radial JS3 Users Guide V2.3 - Part #: R870 1060 00 / 05-2025
Specications and appearance subject to change without notice.
Copyright © 2010 Radial Engineering Ltd.
JS•3 User Guide
Radial Engineering
INPUT PANEL
1. -30dB PAD
Allows line-level sources to
connect to the JS3’s input.
2. Mic input
For low impedance microphone signals.
3. Direct-1 thru
Mic-level direct output will pass
phantom power to microphone.
4. Bookend design
14 gauge steel outer shell creates
protective zone around connectors
and switches.
5. Full-bottom no-slip pad
This provides electrical isolation
and plenty of "stay-put" friction to
keep the JS3 in one place.
OUTPUT PANEL
6. Isolated output-2
Mic-level transformer-isolated.
7. Ground lift (isolated-2)
Lifts the ground pin-1 on the
isolated-2 XLR output connector.
8. Isolated output-1
Mic-level transformer-isolated.
9. Ground lift (Isolated-1)
Lifts the ground pin-1 on the
isolated-1 XLR connector.
CONSTRUCTION
10. Steel I-beam enclosure eliminates
stress that could torque the PC board
and cause solder joint failure.
11. Military-grade double-sided PCB
with plated through-holes is bolted to
welded steel standos.
12.Jensen transformer oers
outstanding audio performance.
13. Sturdy PC mounted switches
are high-cycle rated for long life.
96 7 8
1 52 3 4
10 11 12
13
JS•3 User Guide
Radial Engineering
WELCOME
Congratulations on your purchase of the Radial JS3 mic splitter. This simple yet
extremely handy device will likely nd its way into all types of applications such
as splitting mic signals and distributing signals throughout your sound system.
The Radial JS3 is equipped with the world’s nest Jensen bridging transformer
to ensure the audio signal is transferred and distributed without distortion and is
built using the nest materials to ensure years of trouble-free performance.
We have purposely written this manual to be short, as most users will likely be
familiar with the JS3’s applications. We do suggest that you take a moment to read
through this document to familiarize yourself with the features that are built in. For
more detailed information, please visit the Radial website. This is also where we
post questions and answers that come from users after the product is released. If
you do not nd an answer, we invite you to send us an email at info@radialeng.com
and we will do our best to answer your query in a prompt and professional manner.
The Radial JS3 is a wonderful device that will surely provide you with years of
problem-solving connectivity. Enjoy!
INTRODUCTION
Upon inspection, you will notice the Radial JS3 is equipped with four XLR
connectors: the MIC INPUT connector; the DIRECT-1 THRU; the ISOLATED-1
OUTPUT with ground lift switch and the ISOLATED-2 OUTPUT with ground lift
switch.
Normally, the source microphone connects to the MICROPHONE
INPUT and the DIRECT-1 THRU connects to the mixing console that
supplies phantom power back to the microphone. If the source is a line-
level device such as a CD player, the input pad should be engaged to
ensure the signal does not saturate the transformer, causing distortion.
Note that the JS3 will always output a mic-level signal.
The JS3’s isolated outputs will then feed a recording interface, broadcast truck
or other PA system. The advantage of using the transformer-isolated output is
that it creates a magnetic bridge between the source and the destination, thus
eliminating any direct electrical current from passing. This eliminates problems
such as ground loops, which can cause buzz and hum in a sound system. A
ground lift switch is provided to disconnect the ground path between the input
and output to further suppress noise.
The JS3 is completely passive. This means that it does not require a power
supply of any kind. The magic lies in the quality of the transformer we use.
Jensen transformers are famous for their exceptional signal handling and low
distortion. The JS3 is equipped with a Jensen JT-MBD mic-bridging transformer
that features a laminated nickel core and Faraday shield for optimum signal
transfer. You will nd the JS3 to be transparent and very ecient, making it the
perfect choice in professional installations.
Produktspezifikationen
| Marke: | Radial Engineering |
| Kategorie: | Nicht kategorisiert |
| Modell: | JS3 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Radial Engineering JS3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Radial Engineering
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- Lapp
- Porter-Cable
- Nanoleaf
- Flavel
- AXA
- Smith-Victor
- Kasp
- Hecate
- Amana
- Kiloview
- Lutec
- Hameg
- Koss
- Axkid
- Kichler
Neueste Bedienungsanleitung für -Kategorien-
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025