Radial Engineering OX8 Bedienungsanleitung
Lies die bedienungsanleitung für Radial Engineering OX8 (12 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Radial Engineering OX8 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/12
www.radialeng.com
OX8
User Guide
Eight Channel • Transformer Isolated • Microphone Splitter
Specications and appearance are subject to change without notice.
© Copyright 2021, all rights reserved.
Radial Engineering Ltd.
1845 Kingsway Ave., Port Coquitlam, BC V3C 1S9, Canada
Tel: 604-942-1001 • Fax: 604-942-1010
Email: info@radialeng.com
www.radialeng.com
True to the Music
This page left blank
True to the Music
Radial Engineering Ltd. OX8
™
User Guide
Table of Contents Page
OX8 Introduction......................................................1
OX8 Design Concept ...............................................2
Basics - What is a Splitter........................................2
How a Transformer Works .......................................2
What is a Ground Loop............................................2
Signal Flow Block Diagram......................................3
Feature Set ..............................................................4
Applications .............................................................6
Grounding Options ..................................................7
1
OX8
User Guide
Eight Channel • Transformer Isolated • Microphone Splitter
INTRODUCTION
This user guide covers the installation and operation of the Radial OX8 microphone splitter. We recommend that you take a few min-
utes to read through this manual in order to familiarize yourself with the many innovative features that are built in.
Should you have questions or applications not covered in this manual, we invite you to visit the Radial website at www.radialeng.com
to check the FAQ section for the latest updates. Of course, you can also send us an email at support@radialeng.com.
OX8 DESIGN CONCEPT
The Radial OX8 is an eight channel, balanced microphone splitter in a compact 1RU package that divides the mic signals three ways;
to a direct output; a direct output with ground lift; and an isolated output. A high performance bridging transformer is used on the iso-
lated output to eliminate hum and buzz caused by ground loops.
Splitting microphone signals is a straight forward concept. It’s most common in sound reinforcement and live recording when the on-
stage microphones must be split to feed two mixing consoles. When done improperly, splitting a signal can dull frequency response,
lower the output and worst of all, cause ground loops that produce buzz and hum. To avoid these pitfalls, sound reinforcement com-
panies have been building custom “splitter-snakes” for many years.
The OX8 is an o-the-shelf splitter for the rest of us allowing virtually anyone to design and assemble a splitter-snake with plug-n-play
simplicity and professional audio quality without the need for custom metal work or complex soldering.
Produktspezifikationen
| Marke: | Radial Engineering |
| Kategorie: | Nicht kategorisiert |
| Modell: | OX8 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Radial Engineering OX8 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Radial Engineering
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- Inverx
- Argon
- Aduro
- On Air
- Navman
- Cellular Line
- Lauten Audio
- Tacklife
- Aligator
- RectorSeal
- Adler
- DPA
- Fujitsu
- Pyle Pro
- Pawa
Neueste Bedienungsanleitung für -Kategorien-
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025