Radial Engineering PhazeQ Bedienungsanleitung


Lies die bedienungsanleitung für Radial Engineering PhazeQ (12 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Radial Engineering PhazeQ oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/12
True to the Music
www.radialeng.com
®
True to the Music
®
User Guide
P QHA ZE
500 TOOL
Phase Alignment Tool & Filter
500 Series Module
Radial Engineering Ltd.
1588 Kebet Way, Port Coquitlam
British Columbia, Canada, V3C 5M5
tel: 604-942-1001 • fax: 604-942-1010
email: info@radialeng.com
Radial
®
PHAZEQ
500
User Guide
Table of Contents ......................................................Page
Feature Set .................................................................... 1
Overview ........................................................................ 2
Getting Started ............................................................... 4
Using As Phase Adjustment ........................................... 6
Using As Equalizer ......................................................... 7
Using The Low-pass Filter ............................................. 8
Specifi cations ................................................................. 9
Block Diagram ................................................................ 9
Warranty ........................................................... Back cover
Congratulations and thank you. You are now the proud owner of the Radial PhaseQ™
500, one of the most intriguing products we have ever developed. Why intriguing you ask?
Well, simply stated, messing around with phase is kind of like bending time. Mother Nature
really gets upset when we do these things! And to add even more confusion, we are not
merely messing with the phase between two microphones, the PhaseQ can actually be used
as a whacky equalizer! So hold onto your hat… this ride will be fun.
To get you there as safely as possible, we recommend that you take the time to read this
manual. This will give you some insight on how to use the PhaseQ and what is actually going
on when you move the dials. If by chance you do not fi nd all of the answers you are looking
for, please visit the FAQ page at www.radialeng.com. This is where we post the latest bits
and pieces of information. Then, if you don’t fi nd what your are looking for there send us an
email at info@radialeng.com and we will do our very best to respond to you in short order.
Fasten your seatbelts, set the time-bend constant to year 3022... and then close your eyes.
Listen. Reality just got a whole lot more exciting!
True to the Music
®
Radial Engineering Ltd.
P
HAZEQ 500 Module
8
7
1
4
3
2
6
5
Rear Panel
1
FEATURE SET
1. BLEND Controls the mix between the
original (dry) signal and the phase altered
(wet) signal.
2. PHASE SHIFT Used to set the phase
relationship between the dry and wet
signals or between two devices when
using a stereo source.
3. INVERT - 180º polarity reverse shifts
the phase shift range from to 180º to
181º to 360º for control over the complete
frequency cycle.
4. ON (phase shift) Used to bypass the
phase shift section and compare the
original sound with the phase altered
signal.
5. FILTER Sets the high frequency cut
off range of the low-pass lter. This
lets you apply the phase effect to lower
frequencies.
6. SHIFT - Changes the lter range from the
high range (3kHz to 38kHz) to the low
range (300Hz to 3.8kHz)
7. ON (fi lter) Used to bypass the lter
section and compare the processed
signal with the original.
8. OMNIPORT - Available when used with
the Radial Workhorse, the Omniport is
assigned as a direct dry signal output for
re-patching to other devices.


Produktspezifikationen

Marke: Radial Engineering
Kategorie: Nicht kategorisiert
Modell: PhazeQ

Brauchst du Hilfe?

Wenn Sie Hilfe mit Radial Engineering PhazeQ benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten