Radial Engineering Reamp HP Bedienungsanleitung
Radial Engineering
Nicht kategorisiert
Reamp HP
Lies die bedienungsanleitung für Radial Engineering Reamp HP (10 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 50 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 25.5 Bewertungen. Hast du eine Frage zu Radial Engineering Reamp HP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/10
www.radialeng.com
True to the Music™
®
User Guide
Reamp HP
COMPACT STUDIO REAMPER
Radial Engineering Ltd.
1165-1845 Kingsway Ave, Port Coquitlam
British Columbia, Canada, V3C 1S9
Tel: 604-942-1001 • www.radialeng.com
Email: info@radialeng.com
Table of Contents Page
Overview.......................................................................................1
Features 2 .......................................................................................
Getting Started 3 .............................................................................
Making Connections 4-6 .................................................................
The Mono Switch 6 ..........................................................................
The Level Control 6-7 .....................................................................
The Lift Switch 7 ..............................................................................
Specications ...............................................................................8
Warranty Back cover .......................................................................
Thank you for purchasing the Radial Reamp HP, a compact
studio device designed to make it as easy as possible to add the
power of Reamping into your workow. With the Reamp HP, you
can connect directly to the headphone output on an interface or a
mobile device, and then use this signal to feed your guitar pedals
and ampliers to add a new creative element to your mixes.
We recommend you take a few minutes to read this short
manual before you begin using the Reamp HP, as it covers the
various features of the device and tips for setup and use. Should
you have any questions about the Reamp HP or any other
Radial devices, please visit our website at www.radialeng.com
for additional resources and frequently asked questions.
Radial® Reamp HP User Guide
True to the Music
®
Radial Engineering Ltd. Reamp HP™
OVERVIEW
Reamping is a powerful studio technique that uses a two-step process:
The rst step involves recording your original audio track, and the second
step (which the Reamp HP is built for) is where you send the recorded
audio track back through guitar pedals and ampliers and record the
results. Reamping can be used to try out a guitar DI track through a
variety of ampliers without altering the performance or tiring out the
musician, or it can be used for experimenting with a track by layering
eects pedals or trying new recording techniques.
As Reamping continues to gain in popularity, a growing number of home
studios are employing this technique. However, one problem that arises
in this scenario is that most small-format audio interfaces have a limited
number of line-level outputs available to feed signal to a Reamp device.
These outputs are usually already connected to a pair of studio monitors
and outboard analog eects, meaning that in order to free up an output
for Reamping, it might be necessary to power down some gear and re-
patch cables at the back of the interface.
The Reamp HP was created to streamline this process by tapping the
audio signal from a headphone output jack for Reamping, as this output
is found on the front panel of most interfaces and is easily accessible
when the inspiration to Reamp strikes. This simple but eective design
makes it easy to get started with Reamping in any studio using just a few
quick steps.
1
Connect the headphone output from your interface to the Reamp HP
Feed the output of the Reamp HP into your pedalboard and amplier
Record the output of your amp back into your audio interface
Using the Reamp HP in 3 steps
Produktspezifikationen
| Marke: | Radial Engineering |
| Kategorie: | Nicht kategorisiert |
| Modell: | Reamp HP |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Radial Engineering Reamp HP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Radial Engineering
23 Juni 2025
23 Juni 2025
23 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- Thomann
- Digi
- Autel
- Cosatto
- Lutec
- Sekonic
- Biltema
- Vango
- IHealth
- IQAir
- SKLZ
- MX Select
- Sport Dog
- Mosconi
- Metz
Neueste Bedienungsanleitung für -Kategorien-
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025
30 Juli 2025