Rane GE 30 Bedienungsanleitung
Lies die bedienungsanleitung für Rane GE 30 (4 Seiten) kostenlos online; sie gehört zur Kategorie Mischer. Dieses Handbuch wurde von 36 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 18.5 Bewertungen. Hast du eine Frage zu Rane GE 30 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/4
Manual-1
GE 30
GRAPHIC EQUALIZER
OPERATORS MANUAL
GE 30 CONNECTION
When connecting the GE 30 to other components in your
system for the first time, . is will leave the power supply for last
give you a chance to make mistakes and correct them before any
damage is done.
INPUTS on the GE 30 are balanced. ey may be con-
nected for either balanced or unbalanced operation. is product
offers the choice between going in and out of it using either the
3-pin connectors or the handsome black #6 terminal strips with
the finely plated screws. We will describe here the use of the 3-
pin connectors. e terminal strips are connected in parallel and
are used in the same way. Only the names have been changed.
Pin 2 is hot “+”, pin 3 is return “–”, and pin 1 is chassis ground.
Balanced inputs require the use of pins 2 and 3. Pin 1 is unnec-
essary unless you are using it for shield ground. For unbalanced
operation, pins 1 and 3 must be shorted together to prevent 6 dB
of gain reduction. Drive pin 2 as hot and the combination of 1
and 3 as ground.
OUTPUTS are balanced as well and follow the same con-
vention as the inputs. ere are some tricky things to be careful
of at the output. If active balanced operation is your preference,
hot “+” and return “–” should be all that is required. It does
not take three wires to conduct a signal from one unit to the
next. Connect the shield to case or chassis ground. Transformer
balanced outputs are connected in the same manner. Active un-
balanced output requires “+” and ground only. Use pins 2 and 1
respectively. In this mode, do not short pins 1 and 3. If, however,
you are using the transformer coupled mode and are running
unbalanced, short pins 1 and 3 or you will get little or no do
output. In case you haven’t noticed, if you plan on throwing the
selector switch very often it’s a good idea to connect everything
in a balanced configuration.
QUICK START
If you are one of those people who think owner’s manuals are included with a product to help absorb shock and vibration during
shipment, you are a lot like we are. is section is for you. You want to fire up your equalizer without wading through a bunch of
stuff in manuals. Great. Read on. We’ll keep it short.
Set the input control to about . is is approximately unity gain in the LEVEL 6 BOOST/CUT CUT-ONLY mode. (In the
mode the level control should be set to for unity gain.) Your sound system should be set up such that gain or loss is not required in 2
the equalizer(s). Set the switch on the rear for the desired operating mode, EQ MODE CUT-ONLY or BOOST/CUT. e LEDs on
the front illuminate, telling you which mode you are in. Set the switch on the rear for the desired output coupling OUTPUT MODE
mode ( or ). Adjust the and ACTIVE TRANSFORMER COUPLED LOW CUT HIGH CUT FILTER controls on the front for
the desired low and high cut frequencies. Full counterclockwise on the control and full clockwise on the LOW CUT HIGH CUT
control essentially defeats these functions.
If you read only this section, we assume you know how to set up an equalizer. So set the sliders where you want them and you’re
outta here.
Never connect anything except an RS 1 or other approved Rane AC power supply to the thing that looks like a telephone
jack on the rear of the GE 30. is is an AC input and requires some special attention if you do not have an operational power
supply EXACTLY like the one that was originally packed with your unit. See the full explanation of the power supply requirements
elsewhere in this manual.
WEAR PARTS: is product contains no wear parts.
Produktspezifikationen
| Marke: | Rane |
| Kategorie: | Mischer |
| Modell: | GE 30 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Rane GE 30 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Mischer Rane
8 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
Bedienungsanleitung Mischer
- Day
- Scarlett
- DBX
- Mia
- Proficook
- WesAudio
- Mellerware
- Globe
- Farberware
- Hyundai
- Hotpoint
- Russell Hobbs
- Koenig
- Bork
- Swissonic
Neueste Bedienungsanleitung für -Kategorien-
13 Januar 2026
12 Januar 2026
9 Januar 2026
31 Dezember 2026
25 Dezember 2025
16 Dezember 2025
16 Dezember 2025
7 Dezember 2025
4 Dezember 2025
27 November 2025