Rane RA 27 Bedienungsanleitung
Lies die bedienungsanleitung für Rane RA 27 (6 Seiten) kostenlos online; sie gehört zur Kategorie Mischer. Dieses Handbuch wurde von 47 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 24 Bewertungen. Hast du eine Frage zu Rane RA 27 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/6
Manual-1
OPERATORS MANUAL RA 27
REALTIME ANALYZER
QUICK START
If you are familiar with real time analyzers, feel free to jump right in. To avoid some of the lurking sharks read these
few tips as a reminder of what it is you already know:
FLAT IS NOT BEAUTIFUL. Equalizers have two basic purposes: correction and enhancement. The Rane analyzer
allows you to accurately correct system response to each location. A task very difficult to do by ear. Once this is quickly
done, then you adjust for further sound quality enhancement by ear; only rarely will a system be left in a “flat” condition.
USE MORE THAN ONE TEST MICROPHONE LOCATION. Speaker dispersion characteristics vary greatly, from
beamy highs to boomy bass traps. While performing the pink noise test, try at least two different test mic locations and
average the two if they differ.
USE ENOUGH PINK NOISE VOLUME TO OVERRIDE BACKGROUND NOISE. There’s no need to run
deafening pink noise levels to EQ a system. Just be sure that no green/red LED responds when pink noise is turned off (if
they do, background noise is causing erroneous readings and pink noise should be turned up higher).
USE ±3 dB DISPLAY SETTING FOR LOW FREQUENCY ADJUSTMENTS. The crest factor (peak response) of
true pink noise causes considerable LED flutter in the ±l dB mode, making it difficult to adjust quickly. We recommend
that the ±3 dB setting be used on frequencies below 500 Hz or so; use the ±l dB on the more sensitive mids and highs.
MONITORING PROGRAM WITH ANALYZER DISPLAY. When the front panel microphone is unplugged, the
analyzer display automatically monitors the RA 27 LINE INPUT signal. Use this feature to identify specific feedback
points by watching for red LEDs during the performance. You can then apply EQ exactly where it’s needed very quickly. If
all else fails, read the rest of the manual.
WEAR PARTS: This product contains no wear parts.
Produktspezifikationen
| Marke: | Rane |
| Kategorie: | Mischer |
| Modell: | RA 27 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Rane RA 27 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Mischer Rane
8 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
6 Juli 2025
Bedienungsanleitung Mischer
- Domo
- Fostex
- Blaze
- Korona
- American Audio
- Trebs
- Globe
- Bomann
- Imetec
- Behringer
- Midea
- Akai
- MPM
- Radial Engineering
- Comfee
Neueste Bedienungsanleitung für -Kategorien-
13 Januar 2026
12 Januar 2026
9 Januar 2026
31 Dezember 2026
25 Dezember 2025
16 Dezember 2025
16 Dezember 2025
7 Dezember 2025
4 Dezember 2025
27 November 2025