RC4WD Z-E0106 Bedienungsanleitung
Lies die bedienungsanleitung für RC4WD Z-E0106 (1 Seiten) kostenlos online; sie gehört zur Kategorie Ladegerät. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 8.5 Bewertungen. Hast du eine Frage zu RC4WD Z-E0106 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
Battery Charging
Input Voltage
Output Current
Charging Model
Charging Capability
100VAC~240VAC
650MA
pre-charged, steady current,
monitoring, automatic protection
5-8 NiMH batteries
SPECIFICATIONS
WARNING
The charger can get hot during use. Use the charger in a well ventilated area, away from people and electrically conductive
or inflammable materials.
If the battery has suspicious reactions during the charge or discharge, such as overheating, venting or leaking, immediately
disconnect the battery and store it in a safe location, away from people and inflammable materials.
This charger is designed to charge only 5~8 Cell NiMH batteries.
Make sure that the battery is compatible with the charger’s charge
rate.
Never let children operate unsupervised while charger is in use.
Adult supervision is recommended at all times.
The charger is for indoor use only. Do not use in case of high humidity
conditions or condensation.
Do not attempt to open or modify the charger’s case.
Do not let objects or liquids penetrate the charger’s cooling vents.
1. Charge only batteries that are cool to the touch and are not
damaged (swollen, bent, broken or punctured).
2. Connect the charger to the proper wall receptacle noting
proper polarity.
3. Plug the battery’s connector into the charger’s connector.
The LED will light red as it is charging.
4. The charger will emit a tone and the LED will change to
green once fully charged. NOTE: Monitor the battery during
the charge and end the charging process if the charger or
battery becomes very hot.
5. Always unplug the battery from the charger immediately
upon completion of charging.
CAUTION: Overcharging a battery can cause a fire.
RC4WD Universal NIMH Peak
Battery Charger Instructions
CAUTION Please read these instructions
carefully prior to using!
100-0072
Produktspezifikationen
| Marke: | RC4WD |
| Kategorie: | Ladegerät |
| Modell: | Z-E0106 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit RC4WD Z-E0106 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Ladegerät RC4WD
31 August 2024
Bedienungsanleitung Ladegerät
- Futaba
- Pioneer
- Fluke
- Ultimate Speed
- AVer
- Norauto
- Westfalia
- Creative
- Skullcandy
- Kensington
- Gp Batteries
- Lux Tools
- Fresh 'n Rebel
- ABB
- Amprobe
Neueste Bedienungsanleitung für -Kategorien-
12 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
