RectorSeal RSH-60 Bedienungsanleitung

Lies die bedienungsanleitung für RectorSeal RSH-60 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 5 Bewertungen. Hast du eine Frage zu RectorSeal RSH-60 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

INSTALLATION INSTRUCTIONS

Device Ratings

Normal Voltage

Per Leg

Max. Operating Voltage

(MCOV) Per Leg

Max. Discharge

Current (IMAX)

120 VAC150 VAC60kA

Para instrucciones en español visite www.rectorseal.com

Technical Support Call 1-800-648-6802

All surge protection devices require a good ground connection for effective operation

Installation

1. To assure proper installation, measure the voltage on

each phase and ensure the correct device is installed.

2. Turn off power to the circuit where surge protector is to

be installed.

3. Mount device to keep conductor length as short as

possible. Cut wires to length and connect to circuit per

wiring diagram below avoiding sharp bends or looping.

4. Reinstall covers, restore power and confirm diagnostic

LED is illuminated.

240 VAC DIAGRAM

Split-Phase System: 1 Ph, 2W + G

240 VAC 2POLE DISCONNECT

DIAGRAM

BlackBlack

Green

Ground

GREEN - OKRED - REPLACE

RSH-60

120 VAC DIAGRAM

Single-Phase System: 1 Ph, 2W + G

ALTERNATIVE WIRING METHOD:

This SPD can be also be installed by splicing

into the wires of the WIP, within the disconnect

box or by using a double lug adapter.

BLACK

GREEN

BLACK

120 VAC

Diagnostic Operations

GREEN LED ON=

Systeprotectm ed

RED LED ON=

Replace Device

GREEN - OKRED - REPLACE

RSH-60

240 VAC

120 VAC

120 VAC

BLACK

GREEN

BLACK

GREEN - OKRED - REPLACE

RSH-60

Surge Protective Device (SPD) for Single-Phase

System 120/240 VAC Type 1

Produktspezifikationen