Reelcraft WC80002 Bedienungsanleitung

Lies die bedienungsanleitung für Reelcraft WC80002 (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 14 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 7.5 Bewertungen. Hast du eine Frage zu Reelcraft WC80002 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Operating Instructions

Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725

Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605

Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com

Series WC80000 Welding Cable Reels

Model Numbers:

WC80001WC80002WCH80001

Read this manual carefully before installing,

operating or servicing this equipment.

IMPORTANT

Four 1/2” diameter mounting holes

Dimensions

WCWCH

A24”24”

B25 3/8”25 3/8”

C10”10”

D16”15”

E6”6”

• Ensure that only a qualified electrician installs/services this

equipment.

• Ensure that power supply voltage does not exceed maximum

voltage rating of reel.

• Ensure that reel is properly installed before connecting to power

supply.

• Ensure that all electrical power is removed from reel before ser-

vicing.

• Check for frayed/broken wires before each use.

• Pull electrical cord from reel by grasping the electrical cord itself,

not the work device.

• If an electrical malfunction should occur, remove power from reel

immediately.

• Ensure that reel, electrical cable, and equipment being serviced

are properly grounded. Use an ohmmeter to check ground

continuity.

• If reel ceases to unwind or rewind, remove power immediately.

Do not pull or jerk on electrical cable!

• Treat and respect the cable reel as any other piece of machinery,

observing all common safety practices.

WARNING: Even low voltage can cause irreparable damage or

death! Exercise extreme caution while operating or servicing this

equipment.

WARNING: This reel is to be used for cable storage only! The

entire length of cable must be unwound before use. Severe dam-

age to the reel will result if the cable is energized while fully

wound on the reel.

SAFETY

Personal injury and/or equipment damage may result if proper safety

precautions are not observed.

Form# 1155-304 Rev: 10/2018

Produktspezifikationen