Rega Planar 10 Bedienungsanleitung
Rega
Plattenspieler
Planar 10
Lies die bedienungsanleitung für Rega Planar 10 (25 Seiten) kostenlos online; sie gehört zur Kategorie Plattenspieler. Dieses Handbuch wurde von 25 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 13 Bewertungen. Hast du eine Frage zu Rega Planar 10 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/25
English: For user instructions in your lan-
guage, please visit www.rega.co.uk and go
to the download section of your chosen
product page.
Français: Pour obtenir les instructions aux
utilisateurs dans votre langue, veuillez vis-
iter www.rega.co.uk et vous rendre dans
la section téléchargement de la page de
votre produit choisi.
Deutsch: Eine Gebrauchsanleitung in Ihrer
Sprache nden Sie auf www.rega.co.uk im
Download-Bereich der Seite zu dem von
Ihnen gewählten Produkt.
Italiano: Puoi trovare le istruzioni d’uso
su www.rega.co.uk cliccando sulla sezi-
one Download della pagina del prodotto
scelto.
Español: Para encontrar las instrucciones
de usuario en su idioma, visite www.rega.
co.uk y en la sección de descargas encon-
trará el producto que ha elegido.
Português: Para instruções do utilizador
no seu idioma, visite www.rega.co.uk e en-
tre na secção de transferências da página
do produto escolhido.
Nederlands: Ga voor verdere instructies in
uw taal naar www.rega.co.uk en vervolgens
naar de downloadsectie van de product-
pagina van uw keuze.
Dansk: Find brugsvejledningen på dit sprog
ved at gå til www.rega.co.uk og fortsætte
til downloadafsnittet på siden for det pro-
dukt, du har valgt.
Svenska: För bruksanvisning på ditt språk,
besök www.rega.co.uk och gå till nedladd-
ningssektionen på din valda produktsida.
Polski: Instrukcje użytkowania w danym
języku są dostępne na stronie www.rega.
co.uk, gdzie można ściągnąć część strony,
której dotyczy wybrany produkt.
2
Setup and connections (make all connections before powering up)
Connect the supplied mains power lead to the socket marked ‘Power
In’ on the rear of the P10 PSU.
Connect the XLR interconnect from the rear of the turntable to the
socket marked ‘output’ on the rear of the P10 PSU. To minimise the
risk of hum pick up by the cartridge, the power supply should be
situated as far from the turntable as the interconnect cable will allow.
Connecting to the amplier
The tonearm external phono leads must be connected to a suitable
phono stage. Depending on the type of cartridge you have chosen, you
will require the appropriate moving magnet (MM) or moving coil (MC)
will require an external stage (sold separately).
Connect as follows:
Red = right chanel
Black = left channel
Push the power button on the front panel to turn the P10 PSU on -
When the power supply is switched on, the Rega logo will illuminate
RED.
45 rpm from the front panel.
Cartridge mounting and seing up the RB3000 tonearm
protractor (supplied) to accurately set the position of the cartridge.
Note: When using any Rega cartridge featuring a three-point
mounting system, overhang is automatically set.
With the cartridge correctly mounted and with the stylus guard
removed, ensure that the tracking force dial (a) and bias adjustment
(b) are set to zero. Adjust the balance weight (c) until the arm is
It is normal for the arm to swing back towards the arm clip position
even with the bias set at zero. Therefore it is advisable to gently hold
the arm bearing carrier (just below the tracking dial) thus preventing
horizontal movement during the balancing procedure.
Once the arm is balanced, rotate the tracking force adjustment dial to
the required tracking force. Numbers ‘0’ to ‘3’ are marked on the dial.
If in doubt, it is advisable to use a tracking force that corresponds with
the upper limits of the cartridge manufacturer’s range.
Simply push the bias adjustment slider in to the required setting, using
the dotted line as your reference (as shown above).
Your arm is now balanced, setup and ready to use. If you have any
Rega dealer who will be able to carry out the work for you. Thank you
for purchasing this Rega product and we wish you many hours of
musical enjoyment.
Planar 10 setup and connections
tracking force pressure quoted by your cartridge manufacturer. Note:
coil cartridges.
Underneath tonearm tube
0 1 2
1. Cueing platform 2. Lift lower cueing device
(Used to manually li or lower the tonearm on or off the
vinyl surface)
EN
Produktspezifikationen
| Marke: | Rega |
| Kategorie: | Plattenspieler |
| Modell: | Planar 10 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Rega Planar 10 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Plattenspieler Rega
20 September 2024
30 Juli 2024
19 Juli 2024
15 Juli 2024
23 Juni 2024
19 Januar 2024
22 September 2023
14 Mai 2023
Bedienungsanleitung Plattenspieler
- American Audio
- GoGEN
- Clas Ohlson
- Medion
- GPO
- Sencor
- Exibel
- JVC
- Orava
- Ryght
- McIntosh
- Soundmaster
- Victrola
- Fenton
- Analogis
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
15 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
12 Juni 2025
9 Juni 2025
8 Juni 2025
3 Juni 2025
3 Juni 2025