RetroSound PA-01 Bedienungsanleitung

Lies die bedienungsanleitung für RetroSound PA-01 (3 Seiten) kostenlos online; sie gehört zur Kategorie TV-Antenne. Dieses Handbuch wurde von 35 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 18 Bewertungen. Hast du eine Frage zu RetroSound PA-01 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Welcome

Thank you for purchasing a RetroAntenna

®

power antenna. This antenna features fully automatic operation. Please note that this antenna

does not work with antenna systems requiring a switch.

Our antenna uses a standard end designed to fit most applications. Some factory radios for 1995 and newer Fords, 1988 and newer GMs and

some imports use a unique connector at the the radio, and an adapter may be needed. Contact a local car audio shop for the correct

adapter part if one is needed.

1. Removing the Old Antenna

a) Disconnect the battery before you begin. Gain access to the underside of the fender area through the trunk, fender, splash panel, etc.

b) Remove and disassemble the old antenna and base. Retain the old base and mounting parts for your reference. In some cases you

can reuse them if you wish to keep the old look. Remove the mounting bracket, drain tube, electrical wires and antenna coaxial cable.

When removing electrical wires and the coaxial cable from the antenna, follow the wire’s path to the closest connector and

disconnect. DO NOT CUT THE COAXIAL CABLE

c) Remove the old antenna from below the fender.

Warranty

If your product does not work properly because of defects in materials or workmanship, Retro Manufacturing, LLC (collectively referred to as

the “warrantor”) will for the length of One Year, which starts with the date of original purchase (“warranty period”), at its option either (a)

repair your product with new or refurbished parts, or (b) replace it with a new or refurbished product. The decision to repair or replace will be

made by the warrantor.

To handle warranty issues, contact us at support@retrosound.com or call 702.483.2222. All returns and warranty issues must be

accompanied by a Return Authorization (RA) number along with a copy of your original purchase receipt. Any items sent to us without

a RA number and copy of the receipt will be refused. Once an RA number is issued, send the product along with the original sales

receipt to the address above.

www.retromanufacturing.com

7470 Commercial Way

Henderson, NV 89011

702.483.2222

INSTALLATION INSTRUCTIONS

PA-01 PA-03

Produktspezifikationen