Rinnai Tankless Rack System TRW02EN Bedienungsanleitung
Rinnai
Durchlauferhitzer und Boiler
Tankless Rack System TRW02EN
Lies die bedienungsanleitung für Rinnai Tankless Rack System TRW02EN (20 Seiten) kostenlos online; sie gehört zur Kategorie Durchlauferhitzer und Boiler. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 12 Bewertungen. Hast du eine Frage zu Rinnai Tankless Rack System TRW02EN oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/20
1 Rinnai Rack Installation
Tankless Rack System (TRS) InstallaƟon Manual
Additional information can be obtained from the appliance manual.
— Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other
appliance.
— WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instrucƟons.
• If you cannot reach your gas supplier, call the fire department.
— InstallaƟon and service must be performed by a licensed professional.
If the informaƟon in these instrucƟons is not followed exactly, a fire or explosion
may result causing property damage, personal injury or death.
WARNING
Free Standing Rack
(6 water heaters)
Wall Mounted Rack
(4 water heaters)
2 Rinnai Rack Installation
Description ............................................................ 3
Venting Options ..................................................... 3
TRS Part Nos. and Main Components .................. 4
Specifications ........................................................ 5
Clearances ............................................................ 7
Hoisting ................................................................. 8
Mounting Wall Racks ............................................ 9
Securing Free Standing Racks ............................. 9
Relief Valve Piping .............................................. 10
Piping for Multiple Racks .................................... 10
Parallel Piping Drawing ....................................... 11
End caps / Connections ...................................... 12
Replacement Parts .............................................. 12
Condensate Drain ............................................... 13
Checklist for Plumbing ......................................... 13
Installation of Gas Supply .................................... 14
Connecting Electricity .......................................... 14
MSB Installation................................................... 15
Final Checklist ..................................................... 17
Extended Limited Labor Warranty ....................... 18
Safety Symbols
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in minor or
moderate injury. It may also be used to alert against unsafe practices.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and
others.
DANGER
CAUTION
WARNING
A licensed professional must install the common venng.
The installer should have skills such as
• connecng gas lines, water lines, valves, and electricity
• knowledge of applicable naonal, state, and local codes
If you lack these skills, contact a licensed professional.
InstallaƟon
Table of Contents
3 Rinnai Rack Installation
DescripƟon
Rinnai Tankless Rack Systems (TRS) include wall mounted and free standing configuraons. The wall mounted
rack systems are available for 2, 3, or 4 water heaters. Free standing rack systems are available for 2, 3, 4, 5, or 6
water heaters.
The TRS can be ordered with Rinnai’s Common Venng System, which consists of the CVent exhaust venng and
PVC intake venng Up to eight tankless units share the same CVent system.
The Rinnai TRS features design details that make installaon straigh orward. Gas and water manifolds are
properly sized, and condensate drainage mechanisms and electronic controls for mulple units are included.
The racks are constructed of powder‐coated aluminum, to stand up to the most demanding commercial
environments, while minimizing weight.
The TRS is designed to be used with Rinnai tankless water heaters only. Do not mount non‐Rinnai water heaters
on the TRS.
VenƟng OpƟons
Venng Opons Exhaust Vent Material
Intake Vent
Material Diameter
Max.
Units Max. Vent Length
Common Venng System PPtl (CVent) PVC 8" 8 100' (with 7 units)
Concentric PPs PVC 5" 1 41'
Dual Pipe* PPs PPs or PVC 3" 1 39'
* This venng is provided by Centrotherm through their own distribuon network
• Venng components are packaged together with the pre‐assembled Rack, but not assembled. Assembly of
the vent system is to be done by the contractor in the field.
Produktspezifikationen
| Marke: | Rinnai |
| Kategorie: | Durchlauferhitzer und Boiler |
| Modell: | Tankless Rack System TRW02EN |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Rinnai Tankless Rack System TRW02EN benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Durchlauferhitzer und Boiler Rinnai
11 Juni 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025
1 Dezember 2024
1 Dezember 2024
1 Dezember 2024
1 Dezember 2024
1 Dezember 2024
25 November 2024
Bedienungsanleitung Durchlauferhitzer und Boiler
- Rheem
- Truma
- Bosch
- GE
- Intellihot
- Nefit
- Kelvinator
- Vaillant
- Rommer
- Rheinstrom
- My-PV
- Waeco
- ATAG
- Noveen
- Atlantic
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
14 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025