Robert Abbey Z348 Bedienungsanleitung

Lies die bedienungsanleitung für Robert Abbey Z348 (1 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 6 Bewertungen. Hast du eine Frage zu Robert Abbey Z348 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

S348

ASSEMBLY INSTRUCTIONS:

1. Unpack all parts and place them on a level surface.

2. Align column (G) with base (H).

3. Thread column (G) onto base (H). Pull cord taut from below base

(G) to prevent damage to the wire.

4. Thread column (F) onto column (G). Pull cord taut from below

base (H) to prevent damage to the wire.

5. Thread column (E) onto column (F). Pull cord taut from below

base (H) to prevent damage to the wire.

6. Remove nial (A) from harp (C).

7. Squeeze harp (C) inward and place into the opening of saddle

(D).

8. Place shade (B) onto harp (C).

9. Screw nial (A) onto harp (C) to secure shade to lamp.

10. Install one 150W MAX. Type A bulb into socket.

11. Insert polarized plug (H) into wall outlet.

* To clean, use a soft cloth only. Do not use any chemical or

abrasive cleaners. *

SAFETY INSTRUCTIONS:

* This lamp comes with a polarized plug as a feature to reduce the

risk of electrical shock. If the plug does not t into your outlet,

contact a licensed electrician.

* NEVER alter the plug.

* Remove plug from wall outlet before replacing light bulb.

* Do not connect the electricity until lamp is fully assembled.

ASSEMBLY INSTRUCTIONS FOR YOUR

BANDIT FLOOR LAMP

(A)

(B)

(C)

(D)

(E)

(F)

(G)

(H)

(I)

Produktspezifikationen