Rockustics DubSub Bedienungsanleitung

Lies die bedienungsanleitung für Rockustics DubSub (2 Seiten) kostenlos online; sie gehört zur Kategorie Subwoofer. Dieses Handbuch wurde von 43 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 8 Bewertungen. Hast du eine Frage zu Rockustics DubSub oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

OneSub & DubSub

INSTALL INSTRUCTIONS

© 2021 MSE Audio. Rev. 02.19.2021

Ultra-Fidelity Outdoor Speakers

Contact: MSE Audio, 855.663.5600 / 913.663.5600 / [email protected]

Please read the following instructions carefully before installing

your Rockustics

®

Rock speaker. If you have any questions

regarding installation that are not answered in the following

directions, please contact your local sound contractor or the

Rockustics

®

/MSE Audio

®

technical support team.

OneSub™

The terminal block is on the underside of the OneSub. 14 gauge

or heavier direct burial wire should be run directly from an

amplier with an integrated low frequency crossover (We

recommend a Phase Technology P350 amplier. Please see

P350 manual to setup crossover point.) to the speaker location.

Stripped wire ends are then inserted into the terminal blocks.

DubSub™

The dual terminal blocks are on the underside of the DubSub. 14

gauge or heavier direct burial wire should be run directly from a

dual channel full range amplier. The DubSub has an integrated

crossover that will route the low frequencies to the DubSub, and

the rest of the signal to the satellite speakers.

Wires from the ampliifer are wired to the ‘in’ terminals, and

satellite speakers are wired to the ‘out’ terminals.

INPUT

12V TRIGGER

UNBALANCEDBALANCED

OUTPUT

TRIGGER

MODE

INOUT

MUSIC

ON

12V

4-16 OHMS

INPUT

VOLTAGE

POWER

ONOFF

115V 60 Hz/ 230V 50 Hz

AC INPUT 600W MAX

PUSH

115V

+

+

-

-

P350

Terminal Block

OS-440

LR

L IN

L OUT

R OUT

R IN

Out

+

-

+

-

In

Out

+

-

+

-

In

Produktspezifikationen