Rode Procaster Bedienungsanleitung

Rode Mikrofon Procaster

Lies die bedienungsanleitung für Rode Procaster (8 Seiten) kostenlos online; sie gehört zur Kategorie Mikrofon. Dieses Handbuch wurde von 52 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 26.5 Bewertungen. Hast du eine Frage zu Rode Procaster oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/8
Procaster
Instruction Manual
rode.com
- 2 -
Thank you for investing in the RØDE Procaster
broadcast quality dynamic microphone.
The Procaster has been designed as a no-compromise
microphone for On-Air broadcast use.
Featuring a tight polar pattern and tailored for voice
frequency response, the Procaster is perfect for
every application where a great sounding, rugged
microphone with superior ambient noise rejection is
demanded.
Please take the time to visit www.rode.com and
register your microphone for a full ten year warranty.
While there, you can view studio tips and techniques, as
well as browse a comprehensive range of accessories
for the Procaster and otherDE microphones.
Peter Freedman
DE Microphones
Sydney, Australia
Introduction
- 3 -
Acoustic
Principle:
Dynamic
Polar Pattern: Cardioid (See graph)
Frequency Range: 75Hz ~ 18,000Hz
(see graph)
Output
Impedence:
320Ω
Sensitivity: -56dB ± 2 dB re 1V/Pa
(1.6mV @ 94 dB SPL)
@ 1 kHz
Output
Connection:
3-pin XLR
balanced output between
pin 2(+), pin 3(-)
and pin 1 (ground)
Net weight: 695g (1.53lbs)
Dimensions: Length: 214mm (8.425”)
Width: Ø53mm (2.086”)
Specications


Produktspezifikationen

Marke: Rode
Kategorie: Mikrofon
Modell: Procaster
Breite: 53 mm
Produktfarbe: Schwarz
Übertragungstechnik: Kabelgebunden
Höhe: 214 mm
Warentarifnummer (HS): 85181000
Typ: Studio-Mikrofon
Geräteschnittstelle: mini XLR (3-pin)
Mikrofon-Frequenz: 75 - 18000 Hz
Mikrofon-Empfindlichkeit: -56 dB
Mikrofon-Eingangsimpedanz: 32 Ohm
Mikrofongewicht: 695 g

Brauchst du Hilfe?

Wenn Sie Hilfe mit Rode Procaster benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten