Roland HP-237R Bedienungsanleitung

Lies die bedienungsanleitung für Roland HP-237R (5 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 158 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 79.5 Bewertungen. Hast du eine Frage zu Roland HP-237R oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1

DIGITAL PIANODate: Feb. 1, 2000

Model HP-237Version: 1.01MIDI Implementation

1.Receive Data

■Channel Voice Messages

●Note o

Status2nd byte3rd byte

8nH kkH vvH

9nH kkH 00H

n = MIDI channel number : 0H-FH (ch.1-ch.16)

kk = note number: 00H-7FH (0-127)

vv = note o velocity : 00H-7FH (0-127)

*The velocity values of Note O messages are ignored.

●Note on

Status2nd byte3rd byte

9nH kkH vvH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

kk = note number: 00H-7FH (0-127)

vv = note on velocity: 01H-7FH (1-127)

*Note numbers outside the range of 15-113 are transposed to the nearest octave within

this range.

*Transpose function does not aect the recognized note numbers.

●Control Change

*The value specied by a Control Change message will not be reset even by a Program

Change, etc.

❍Data Entry (Controller number 6, 38)

Status2nd byte3rd byte

BnH 06HmmH

BnH 26HllH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

mm, ll = the value of the parameter specied by RPN

❍Volume (Controller number 7)

Status2nd byte3rd byte

BnH 07HvvH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

vv = Volume: 00H-7FH (0-127), Initial Value = 7FH (127)

*Received volume messages aect received note event levels, and cannot aect

internal keyboard notes.

❍Expression (Controller number 11)

Status2nd byte3rd byte

BnH 0BHvvH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

vv = Expression : 00H-7FH (0-127), Initial Value = 7FH (127)

*These message can aect only MIDI notes.

❍Hold 1 (Controller number 64)

Status2nd byte3rd byte

BnH 40HvvH

n = MIDI channel number : 0H-FH (ch.1-ch.16)

vv = Control value : 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON

*These message can aect only MIDI notes.

❍Sostenuto (Controller number 66)

Status2nd byte3rd byte

BnH 42HvvH

*These message can aect only MIDI notes.

n=MIDI channel number: 0H-FH (ch.1-ch.16)

vv=Control value: 00H-7FH (0-127) 0-63 = OFF 64-127 = ON

*These message can aect only MIDI notes.

❍Soft (Controller number 67)

Status2nd byte3rd byte

BnH 43HvvH

n=MIDI channel number: 0H-FH (ch.1-ch.16)

vv=Control value: 00H-7FH (0-127) 0-63 = OFF 64-127 = ON

*These message can aect only MIDI notes.

❍Eect 1 (Reverb Send Level) (Controller number 91)

Status2nd byte3rd byte

BnH 5BHvvH

n=MIDI channel number: 0H-FH (ch.1-ch.16)

vv=Control value: 00H-7FH (0-127) 0-63 = OFF 64-127 = ON

❍Eect 3 (Chorus Send Level) (Controller number 93)

Status2nd byte3rd byte

BnH5DH vvH

n=MIDI channel number: 0H - FH (ch.1 - ch.16)

vv=Control value: 00H - 7FH (0 - 127) 0-63=OFF 64-127=ON

❍RPN MSB/LSB (Controller number 100, 101)

Status2nd byte3rd byte

BnH 65HmmH

BnH 64HllH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

mm = upper byte of parameter number specied by RPN

ll = lower byte of parameter number specied by RPN

*The value specied by RPN will not be reset even by messages such as Program Change

or Reset All Controller.

**RPN**

The RPN (Registered Parameter Number) messages are expanded control changes, and each

function of an RPN is described by the MIDI Standard.

To use these messages, you must rst use RPN MSB and RPN LSB messages to specify the

parameter to be controlled, and then use Data Entry messages to specify the value of the

specied parameter. Once an RPN parameter has been specied, all Data Entry messages

received on that channel will modify the value of that parameter. To prevent accidents, it is

recommended that you set RPN Null (RPN Number = 7FH/7FH) when you have nished

setting the value of the desired parameter.

On the HP-237, RPN can be used to modify the following parameters.

RPNData entry

MSB LSBMSB LSBExplanation

00H 01HmmH llHMaster Fine Tuning

mm, ll: 00 00H - 40 00H - 7F 7FH

(-100 - 0 - +99.99 cents),

Initial Value = 40 00H (±0 cent)

7FH 7FH--- ---RPN null

Set condition where RPN and NRPN are

unspecied. The data entry messages after set

RPN null will be ignored. (No Data entry

messages are required after RPN null).

Settings already made will not change.

mm, ll: ignored

Copyright © 2000 ROLAND CORPORATION

All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.

Produktspezifikationen