Roland HP 337 Bedienungsanleitung

Lies die bedienungsanleitung für Roland HP 337 (19 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 29 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 15 Bewertungen. Hast du eine Frage zu Roland HP 337 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1

DIGITAL PIANODate: Apr. 1, 2000

Model HP-337Version: 1.00MIDI Implementation

1.Receive data

■Channel Voice Messages

●Note o

Status2nd byte3rd byte

8nHkkHvvH

9nHkkH00H

n = MIDI channel number: 0H-FH (ch.1-ch.16)

kk = note number: 00H-7FH (0-127)

vv = note o velocity: 00H-7FH (0-127)

*For Drum Parts, these messages are received when Rx.NOTE OFF = ON for each

Instrument.

*The velocity values of Note O messages are ignored.

●Note on

Status2nd bytes3rd byte

9nHkkHvvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

kk = note number: 00H-7FH (0-127)

vv = note on velocity: 01H-7FH (1-127)

*Not received when Rx.NOTE MESSAGE = OFF. (Initial value is ON)

*For Drum Parts, not received when Rx.NOTE ON = OFF for each Instrument.

●Polyphonic Key Pressure

Status2nd bytes3rd byte

AnHkkHvvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

kk = note number: 00H-7FH (0-127)

vv = key pressure: 00H-7FH (0-127)

*Not received when Rx.POLY PRESSURE (PAf) = OFF. (Initial value is ON)

*The resulting eect is determined by System Exclusive messages. With the initial

settings, there will be no eect.

●Control Change

*When Rx.CONTROL CHANGE = OFF, all control change messages except for Channel

Mode messages will be ignored.

*The value specied by a Control Change message will not be reset even by a Program

Change, etc.

❍Bank Select (Controller number 0, 32)

Status2nd bytes3rd byte

BnH00HmmH

BnH20HllH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

mm, ll = Bank number: 00H, 00H-7FH, 7FH (bank.1-bank.16384), Initial Value = 00 00H

(bank.1)

*Not received when Rx.BANK SELECT = OFF.

*"Rx.BANK SELECT" is set to OFF by "GM1 System On," and Bank Select message will be

ignored.

*"Rx.BANK SELECT" is set to ON by "GM2 System On."

*"Rx.BANK SELECT" is set to ON by power-on Reset or by receiving "GS RESET."

*When Rx.BANK SELECT LSB = OFF, Bank number LSB (llH) will be handled as 00H

regardless of the received value. However, when sending Bank Select messages, you

have to send both the MSB (mmH) and LSB (llH, the value should be 00H) together.

*Bank Select processing will be suspended until a Program Change message is received.

*The GS format "Variation number" is the value of the Bank Select MSB (Controller

number 0) expressed in decimal.

*Some other GS devices do not recognize the Bank Select LSB (Controller number 32).

❍Modulation (Controller number 1)

Status2nd bytes3rd byte

BnH01HvvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Modulation depth: 00H-7FH (0-127)

*Not received when Rx.MODULATION = OFF. (Initial value is ON)

*The resulting eect is determined by System Exclusive messages. With the initial

settings, this is Pitch Modulation Depth.

❍Portamento Time (Controller number 5)

Status2nd bytes3rd byte

BnH05HvvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Portamento Time: 00H-7FH (0-127), Initial value = 00H (0)

*This adjusts the rate of pitch change when Portamento is ON or when using the

Portamento Control. A value of 0 results in the fastest change.

❍Data Entry (Controller number 6, 38)

Status2nd bytes3rd byte

BnH06HmmH

BnH26HllH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

mm, ll = the value of the parameter specied by RPN/NRPN

mm = MSB, ll = LSB

❍Volume (Controller number 7)

Status2nd bytes3rd byte

BnH07HvvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Volume: 00H-7FH (0-127), Initial Value = 64H (100)

*Volume messages are used to adjust the volume balance of each Part.

*Not received when Rx.VOLUME = OFF. (Initial value is ON)

❍Pan (Controller number 10)

Status2nd bytes3rd byte

BnH0AHvvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = pan: 00H-40H-7FH (Left-Center-Right), Initial Value = 40H (Center)

*For Rhythm Parts, this is a relative adjustment of each Instrument's pan setting.

*Some Tones are not capable of being panned all the way to the left or right.

*Not received when Rx.PANPOT = OFF. (Initial value is ON)

❍Expression (Controller number 11)

Status2nd bytes3rd byte

BnH0BHvvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Expression: 00H-7FH (0-127), Initial Value = 7FH (127)

*This adjusts the volume of a Part. It can be used independently from Volume messages.

Expression messages are used for musical expression within a performance;

e.g., expression pedal movements, crescendo and decrescendo.

*Not received when Rx.EXPRESSION = OFF. (Initial value is ON)

❍Hold 1 (Controller number 64)

Status2nd bytes3rd byte

BnH40HvvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Control value: 00H-7FH (0-127)

*Not received when Rx.HOLD1 = OFF. (Initial value is ON)

❍Portamento (Controller number 65)

Status2nd bytes3rd byte

BnH41HvvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Control value: 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON

*Not received when Rx.PORTAMENTO = OFF. (Initial value is ON)

❍Sostenuto (Controller number 66)

Status2nd bytes3rd byte

BnH42HvvH

n = MIDI channel number: 0H-FH (ch.1-ch.16)

vv = Control value: 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON

*Not received when Rx.SOSTENUTO = OFF. (Initial value is ON)

Copyright © 2000 ROLAND CORPORATION

All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.

Produktspezifikationen