Roland ST-AX2 Bedienungsanleitung
Roland
Nicht kategorisiert
ST-AX2
Lies die bedienungsanleitung für Roland ST-AX2 (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 12.5 Bewertungen. Hast du eine Frage zu Roland ST-AX2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/1
Owner’s Manual for the AX-Edge or AX-Synth Dedicated Stand
Before using this product, carefully read this owner’s manual.
IMPORTANT NOTES
5This product is a dedicated stand for the Roland AX-Edge or AX-Synth. Do not use this product for
other purposes.
5Do not perform any modications on the product.
5Before you use this stand, make sure that the stand’s legs are opened completely.
5Make sure you always have the product placed so it is level and sure to remain stable. Never place it
on stands that could wobble, or on inclined surfaces.
5In households with small children, an adult should provide supervision until the child is capable of
following all the rules essential for the safe operation of the product.
5Protect the product from strong impact. (Do not drop it!)
5Never climb on top of, nor place heavy objects on the product.
5When folding or assembling this stand, take care not to pinch your hand or ngers.
5For everyday cleaning wipe the product with a soft, dry cloth or one that has been slightly
dampened with water. To remove stubborn dirt, use a cloth impregnated with a mild,
non-abrasive detergent. Afterwards, be sure to wipe the product thoroughly with a soft,
dry cloth.
5Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration
and/or deformation.
5Depending on the material and temperature of the surface on which you place the stand, its rubber
feet may discolor or mar the surface. You can place a piece of felt or cloth under the rubber feet to
prevent this from happening. If you do so, please make sure that the product will not slip or move
accidentally.
5When placing the AX-Edge or AX-Synth on this stand or removing the AX-Edge or AX-Synth from
this stand, take care that the cable or strap does not become tangled.
5This document explains the specications of the product at the time that the document was issued.
For the latest information, refer to the Roland website.
© 2018 Roland Corporation
When using the stand, lower
the fall-prevention bar.
Placing the AX-Synth
Rubber pad
Place the AX-Synth so that its
rubber pad is between the
lower arms.
Placing the AX-Edge
Strap pin
Place the AX-Edge so that its
strap pin is between the lower
arms.
Placing the AX-Edge
Adjust the position of the
fall-prevention bar so that it
supports the lower part of the
AX-Edge as much as possible.
Placing the AX-Synth
Adjust the fall-prevention
bar so that it is between the
AX-Synth’s touch controller
and [OCTAVE/VARIATION]
button.
ST-AX2 01
English
Produktspezifikationen
| Marke: | Roland |
| Kategorie: | Nicht kategorisiert |
| Modell: | ST-AX2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Roland ST-AX2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Roland
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
Bedienungsanleitung Nicht kategorisiert
- Vishay
- Arlec
- Wacom
- Universal Remote Control
- Mr Steam
- Gossen
- Nuki
- Woodland Scenics
- Ozone
- Flama
- Peavey
- NovaStar
- Kramer
- Antelope
- Melinera
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025