Roland TMC-6 Bedienungsanleitung


Lies die bedienungsanleitung für Roland TMC-6 (32 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 2 Bewertungen. Hast du eine Frage zu Roland TMC-6 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/32
Owner’s Manual
201a
Before using this unit, carefully read the sections entitled: “USING THE
UNIT SAFELY” (p. 2–3) and “IMPORTANT NOTES” (p. 4). These sections
provide important information concerning the proper operation of the unit.
Additionally, in order to feel assured that you have gained a good grasp of
every feature provided by your new unit, Owner’s manual should be read in
its entirety. The manual should be saved and kept on hand as a convenient
reference.
202
Copyright © 2002 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any
form without the written permission of ROLAND CORPORATION.
Thank you and congratulations on your choice of the Roland Trigger MIDI
Converter TMC-6.
203 220
* GS ( ) is a registered trademark of Roland Corporation.
* All product names mentioned in this document are trademarks or registered
trademarks of their respective owners.
2
USING THE UNIT SAFELY
001
Before using this unit, make sure to read the
instructions below, and the Owner’s Manual.
................................................................................................
002c
Do not open (or modify in any way) the unit
or its AC adaptor.
................................................................................................
003
Do not attempt to repair the unit, or replace
parts within it (except when this manual
provides specific instructions directing you
to do so). Refer all servicing to your retailer,
the nearest Roland Service Center, or an
authorized Roland distributor, as listed on
the "Information" page.
................................................................................................
004
Never use or store the unit in places that are:
Subject to temperature extremes (e.g.,
direct sunlight in an enclosed vehicle, near
a heating duct, on top of heat-generating
equipment); or are
Damp (e.g., baths, washrooms, on wet
floors); or are
Humid; or are
Exposed to rain; or are
Dusty; or are
Subject to high levels of vibration.
................................................................................................
005
This unit should be used only with a rack
or stand that is recommended by Roland.
................................................................................................
006
When using the unit with a rack or stand
recom-mended by Roland, the rack or stand
must be carefully placed so it is level and
sure to remain stable. If not using a rack or
stand, you still need to make sure that any location
you choose for placing the unit provides a level
surface that will properly support the unit, and
keep it from wobbling.
................................................................................................
007
Make sure you always have the unit placed
so it is sure to remain stable. Never place it
on stands that could wobble, or on inclined
surfaces.
................................................................................................
008c
Be sure to use only the AC adaptor supplied
with the unit. Also, make sure the line
voltage at the installation matches the input
voltage specified on the AC adaptor’s body.
Other AC adaptors may use a different
polarity, or be designed for a different
voltage, so their use could result in damage,
malfunction, or electric shock.
................................................................................................
009
Do not excessively twist or bend the power
cord, nor place heavy objects on it. Doing so
can damage the cord, producing severed
elements and short circuits. Damaged cords
are fire and shock hazards!
................................................................................................
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
The symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.


Produktspezifikationen

Marke: Roland
Kategorie: Nicht kategorisiert
Modell: TMC-6

Brauchst du Hilfe?

Wenn Sie Hilfe mit Roland TMC-6 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten