Roland UA-4FX2 Bedienungsanleitung

Roland Nicht kategorisiert UA-4FX2

Lies die bedienungsanleitung für Roland UA-4FX2 (18 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 70 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 35.5 Bewertungen. Hast du eine Frage zu Roland UA-4FX2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/18

Owner’s Manual

UA-4FX2

Before using this unit, carefully read “USING THE UNIT SAFELY” (p. 16) and “IMPORTANT NOTES” (p. 17). After reading, keep the document(s) where it will

be available for immediate reference.

Contents of the Package

5UA-4FX2

5Owner’s Manual (this document)

5USB cable

Installing the Driver

* Do not use a micro USB cable that is designed only for charging a device. Charge-only cables cannot transmit data.

Windows 10 Users

1. Use the included USB cable to connect the UA-4FX2 to your computer.

The driver is installed automatically.

Windows 7 or Windows 8.1 Users

NOTE

Don’t connect the UA-4FX2 to your computer before installing the driver.

If you’ve already connected the UA-4FX2, temporarily disconnect it.

When the screen indicates “Ready to install the driver. ---,” connect the UA-4FX2.

1. Start up Windows with all USB cables disconnected other than the cables of your keyboard and mouse.

2. Download the driver from the following URL.

http://roland.cm/ua4fx2

3. Before you begin installation, close all applications.

4. Unpack the downloaded Zip le, and double-click “Setup.”

5. If a user account control conrmation screen appears, click [Yes].

6. In the dialog box that indicates “UA-4FX2 Driver will be installed on your computer. ---,” click [Next].

* If any other message appears, proceed as directed by the message.

7. To begin installation, click [Next].

8. If a Windows security dialog box appears, click [Install].

9. Note the dialog box that indicates “Ready to install the driver. ---”

* If any other message appears, proceed as directed by the message.

10. Use the included USB cable to connect the UA-4FX2 to your computer.

The driver is installed automatically.

11. In the dialog box that indicates “Installation has been completed.”, click [Close].

12. If the “System Settings Change” dialog box appears, click [Yes] and restart Windows.

Produktspezifikationen

Marke:	Roland
Kategorie:	Nicht kategorisiert
Modell:	UA-4FX2
Breite:	146 mm
Tiefe:	110 mm
Gewicht:	240 g
Mitgelieferte Kabel:	USB
Produktfarbe:	Black,Grey
Höhe:	42 mm
Energiequelle:	USB
Betriebsanleitung:	Ja
Geräteschnittstelle:	USB
Anzahl der USB-Anschlüsse:	1
Formfaktor:	Desktop
Audioanschlüsse:	2
Audio-A/D-Wandler (ADC):	24-bit/48kHz
Audioausgang:	2
Unterstützte Abtastraten:	44.1,48,96,192 kHz