Ryobi SDS65 Bedienungsanleitung
Ryobi
Bohrmaschine
SDS65
Lies die bedienungsanleitung für Ryobi SDS65 (32 Seiten) kostenlos online; sie gehört zur Kategorie Bohrmaschine. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 3.7 Sterne aus 2 Bewertungen. Hast du eine Frage zu Ryobi SDS65 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/32
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
SDS+ HAMMER DRILL
PERCEUSE À PERCUSSION
DE SDS+
TALADRO DE PERCUSIÓN
DE SDS+
SDS65
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe
leer y comprender el manual del
operador antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation
avant d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
General Power Tool Safety
Warnings .........................................2-3
Hammer Drill Safety Warnings ...........3
Symbols ..............................................4
Electrical ............................................. 5
Features ..............................................6
Assembly .........................................6-7
Operation .........................................7-9
Maintenance ..................................... 10
Illustrations ..................................11-12
Parts Ordering / Service ..... Back Page
Règles de sécurité relatives
aux outils électriques ......................2-3
Avertissements de sécurité
relatifs perceuse à percussion ...........3
Symboles ............................................4
Caractéristiques électriques ...............5
Caractéristiques .................................6
Assemblage .....................................6-7
Utilisation .........................................7-9
Entretien ...........................................10
Illustrations ..................................11-12
Commande de pièces/
réparation ..........................Page arrière
Advertencias de seguridad
para herramientas eléctricas ...........2-3
Advertencias de seguridad
taladro de percusión ..........................3
Símbolos ............................................4
Aspectos eléctricos ............................ 5
Características ...................................6
Armado ............................................6-7
Funcionamiento .............................7-10
Mantenimiento ..................................10
Ilustraciones ................................11-12
Pedidos de piezas /
Servicio ......................... Pág. posterior
INCLUDES: Hammer Drill, Auxiliary Handle
Assembly with Depth Stop Rod, Operator’s
Manual
****************
TABLE OF CONTENTS
INCLUT : Perceuse à percussion, poignée
auxiliaire et tige de butée de profondeur,
manuel d’utilisation
****************
TABLE DES MATIÈRES
INCLUYE: Taladro de percusión, mango
auxiliar con barra limitadora de profundidad,
manual del operador
****************
ÍNDICE DE CONTENIDO
2 — English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cord-
less) power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric
shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the risk
of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can
be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other
condition that may affect the power tool’s operation.
If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
Produktspezifikationen
| Marke: | Ryobi |
| Kategorie: | Bohrmaschine |
| Modell: | SDS65 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ryobi SDS65 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Bohrmaschine Ryobi
18 Juni 2025
18 Juni 2025
30 November 2024
30 November 2024
30 November 2024
1 Mai 2024
13 April 2024
30 März 2024
15 Februar 2024
31 Januar 2024
Bedienungsanleitung Bohrmaschine
- Alpha Tools
- Cotech
- Milwaukee
- Parkside
- Hilti
- Vonroc
- Toolcraft
- Dremel
- Smart365
- Silverline
- Bavaria
- AEG
- Stanley
- Ozito
- Hazet
Neueste Bedienungsanleitung für -Kategorien-
19 Juni 2025
19 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025