Sanus WSIWP1-W1 Bedienungsanleitung

Lies die bedienungsanleitung für Sanus WSIWP1-W1 (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 37 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 19 Bewertungen. Hast du eine Frage zu Sanus WSIWP1-W1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Verify Speaker Plug Fit

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS

CAUTION: Avoid potential personal injuries and property damage!

●Please read through these instructions completely to be sure you’re comfortable with this easy install process.

●Do not use this product for any purpose not explicitly specified by manufacturer.

●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.

●If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product,

contact Customer Service

Tools Required

Tape Measure

This product conforms to and should be properly grounded in compliance with requirements of the current National Electrical Code or

codes administered by local authorities.

All electrical products may present a possible shock or fire hazard if improperly installed or used. This product may bear the mark of a

Nationally Recognized Testing Laboratory and should be installed in conformance with current local and/or the National Electrical Code.

WARNING: RISK OF FIRE AND SHOCK. Do not connect the modules01 or02 to any other circuits or outlets.

CAUTION: RISK OF FIRE AND SHOCK. ONLY intended for use on 15 ampere branch circuits.

CAUTION: RISK OF FIRE AND SHOCK. Do not install power supply cord03 within wall cavity.

PencilPhillips Screwdriver

Paint (optional)

Surfaces are paintable

to match your decor

Electric Drill

WARNING: This product contains small items that could be a choking hazard if swallowed.

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not

return the damaged item to your dealer; contact Customer Service. Never use damaged parts!

MAX

1 ⅛ in. (29 mm)

BEFORE DRILLING ANY HOLES:

Make sure your speaker plug fits in

the upper module01 .

Verify Wall Compatibility

Legrand AV Inc. and its aliated corporations and subsidiaries (collectively, “Legrand”), intend to make this manual accurate and complete. However, Legrand makes no claim that the

information contained herein covers all details, conditions, or variations. Nor does it provide for every possible contingency in connection with the installation or use of this product. The

information contained in this document is subject to change without notice or obligation of any kind. Legrand makes no representation of warranty, expressed or implied, regarding the

information contained herein. Legrand assumes no responsibility for accuracy, completeness or suciency of the information contained in this document.

©2020 Legrand AV Inc. All rights reserved. SANUS is a Legrand brand. SANUS and the SANUS logo are trademarks of Legrand.

Legrand AV INC. 6436 City West Parkway; Eden Prairie, MN 55344 USA

STEP 1

v

Upper Module

Driver Bit

(hole saw)

Hole Saw

3 in.

Lower ModulePower Supply Cord03 04

05

02

01

Assemble the

Hole Saw

abDrill Holes

Drill Holes

TIP: Drill the top hole on the

less visible side, of your speaker.

05

04

04

01

Maximum Distance: 6 feet

Maximum

Height:

10 feet

1025682 03/20

ModelWSIWP1-W1

OWNERS GUIDE

IN-WALL CABLE KIT

Before getting started, let’s make sure this product is perfect for you!

Included

Supplied Parts

This Cable Kit is designed to fit into both interior

and exterior walls constructed with:

Minimum Space into Wall:3 in.

Minimum Drywall Thickness: 1/2 in. (MAX: 1 in.)

No Fire Block Stud in the cavity *

NOTE:

The cable Pass-

Through Width is

1.75 inch.

Walls with blown-

in type insulation

may require

removal of some

insulation inside

the cavity.

Drywall

Stud

Back Wall

We’ll Make It Stress-Free

If you have any questions along the way, just give us a call.

800-359-5520 or, chat at SANUS.com/chatSP

We’re ready to help!

* A horizontal fire block stud requires a 1.75 inch hole to pass the power cord.

This requires removal, then repair of drywall, to gain access to that stud.

We recommend you consult a professional.

Produktspezifikationen