Satco S11885 Bedienungsanleitung

Lies die bedienungsanleitung für Satco S11885 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 8 Bewertungen. Hast du eine Frage zu Satco S11885 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

5"/6" LED DOWNLIGHT

RETROFIT

Model: S11885

Satco Products, Inc.

Brentwood, NY 11717

INSTALLATION AND SAFETY INSTRUCTIONS

IMPORTANT: Read before installing xture. Retain for future reference.

Before installation, select your preferred

CCT and Wattage settings by adjusting

the sliding switches.

Gently push up the LED downlight until

trim is ush with the ceiling. Ensure no

wires are exposed.

After ceiling installation with torsion

springs, the square trims can be rotated

up to 90º to align with the wall. Turn

on power.

INSTALLATION:

1

Turn off power prior to installation.

Remove the diffuser and existing bulb

if necessary. Remove the existing trim.

4

5

6

2

3

Dimensions:

© Copyright 2023 Satco Products, Inc. 12/23 v2.0

Connect the quick

disconnect between

the retrot kit and

the medium base

umbilical socket.

Min: 5"

Twist the lamp base into

the lamp holder.

4.23"

7.13"

Min: 7.24"

2700k

3000k

3500k

4000k

5000k

8W

10.5W

13.5W

WARNING: Risk of Fire or Electric Shock

• TURN OFF the electrical power before proceeding.

• Please examine all parts that are not intended to be replaced by the retrot kit for damage and

replace any damaged parts prior to installation of the retrot kit.

• The retrot kit is accepted as a component of a luminaire where the suitability of the combination

shall be determined by authorities having jurisdiction.

• LED retrot kit installation requires knowledge of luminaires electrical systems. If not qualied, do

not attempt installation. Contact a qualied electrician. Installation of this retrot assembly requires

a person familiar with the construction and operation of the luminaire’s electrical system and the

hazard involved. If not qualied, do not attempt installation. Contact a qualied electrician.

• To reduce risk of re and over-heating, secure all connections are tight.

• Install this kit only in luminaires that have the construction features and dimensions shown in

the photographs and/or drawings and where the input rating of the retrot kit does not exceed the

input rating of the luminaire.

• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other

sharp objects.

• Do not make or alter any open holes in an enclosure of wiring or electrical components during

kit installation.

• This device is not intended for use with emergency exits.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modications to this unit not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

WARRANTY: This product is guaranteed for a 5 year warranty. Any quality issue in normal

use within the warranty period, will be repaired or replaced according to the situation and under the

condition specications can be provided. Visit www.Satco.com for full warranty details and dimmer

compatibility information.

Produktspezifikationen