Sauermann COST-S Bedienungsanleitung


Lies die bedienungsanleitung für Sauermann COST-S (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 13 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 7 Bewertungen. Hast du eine Frage zu Sauermann COST-S oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
COST-S
CO Stats
CO detector
DATA SHEET
Parameter Accuracy Measuring range Resolution*
CO ±3 ppm or 3% of the reading value From 0 to 500 ppm 0.1 ppm
Technical features
*All the accuracies indicated in this technical datasheet were stated in laboratory conditions, and can be guaranteed for measurements carried out in the same conditions, or carried out with calibration compensation.
RCR relay output,
3 A / 240 Vac (NC),
power supply 24 Vac/Vdc
ABS V0 IP20 housing
“¼ turn” system mounting
with wall-mount plate
Housing with simplied
mounting system
Visual and audible alarm,
red led in front
Measuring range
from 0 to 500 ppm
CO
CO
Output 1 RCR relay. NO (normally opened): 5A / NC (normally closed): 3A / 240 Vac.Common mode voltage <30 Vac
Power supply 24 VAC/VDC ±10%
Consumption 3 VA
Relay and alarm status Red led in front and internal buzzer (70 dB at 10 cm)
European directives 2014/30/EU EMC; 2014/35/EU Low Voltage; 2011/65/EU RoHS II; 2012/19/EU WEEE
Electrical connection Terminal block for cables Ø0.05 to 2.5 mm
2
. Carried out according to the code of good practice
PC communication USB-mini Din cable
Environment Air and neutral gas
Measured parameter


Produktspezifikationen

Marke: Sauermann
Kategorie: Nicht kategorisiert
Modell: COST-S

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sauermann COST-S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten