Sauermann Si-CA 230 Bedienungsanleitung

Sauermann Messung Si-CA 230

Lies die bedienungsanleitung für Sauermann Si-CA 230 (17 Seiten) kostenlos online; sie gehört zur Kategorie Messung. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Sauermann Si-CA 230 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/17
sauermanngroup.com
SI-CA 130 / SI-CA 230
Quick Start Guide
PTESFREN IT DE ZH
1
2
3
4
5
6
7
1. Min-DIN connection for CO and CO
2
probe
2. Thermocouple connection for air
temperature
3. Thermocouple connection for ue gas
temperature
4. P- connection
5. P+ connection
6. Gas connection
7. USB connection
2 Analyzers description
3 Operating temperature, protection of the instruments and information about storage
Operating temperature: from -5 to 45 °C (23 to 113 °F)
Protection: IP42
If the instrument is stored outside the operating temperature (for example in a van, a
warehouse,...) please let the analyzer acclimate to room temperature for at least 15 minutes
before starting and operating the analyzer.
If the ambient temperature is lower than 10 °C (50 °F), the analyzer should be acclimated
to ambient temperature before performing measurements.
4 First start-up
DO NOT insert the gas probe in the ue/chimney/stack.
Keep pressed for 3 seconds to turn on the analyzer.
Tap "Start".
Select your country
then tap "Next".
Select your
language then tap
"Next".
Set the date then
tap "Next".


Produktspezifikationen

Marke: Sauermann
Kategorie: Messung
Modell: Si-CA 230

Brauchst du Hilfe?

Wenn Sie Hilfe mit Sauermann Si-CA 230 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten