Scanstrut SATPT-40 Bedienungsanleitung


Lies die bedienungsanleitung für Scanstrut SATPT-40 (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 3 Bewertungen. Hast du eine Frage zu Scanstrut SATPT-40 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/3
Scanstrut Ltd.
Scanstrut Ltd.
Scanstrut Ltd.
Scanstrut Ltd. Scanstrut Ltd. 1 Malt Mill, Totnes, Devon, UK TQ9 5NH Tel:
Tel:
Tel:
Tel:Tel: +44(0)1803 863800 Fax:
Fax:
Fax:
Fax:Fax: +44(0)1803 862223
e-mail:
e-mail:
e-mail:
e-mail:e-mail: [email protected] website:
website:
website:
website:website: www.scanstrut.com
Satcom/TV PowerTower – SATPT-33, SATPT-40
Installation Instructions
[ ] 1 x SATPT
[ ] 1 x SATPT Base Seal [19050]
[ ] 4 x Nylon Shouldered Washers [64004]
Also Required:
4 x M10 Stainless Steel bolts, large washers and nuts to attach SATPT to deck/arch.
Length to suit deck/arch thickness.
10.5mm Drill.
Hole Cutter for cable loom; approx 50[2”] or 60[2.4”]mm dia.
Drilling Guide
1:1 drilling guide
follows below.
Fitting SATPT
1. Drill holes in arch to match SATPT base and a central cable exit – See drilling guide.
2. Thread the cable loom up through the arch, base seal and into the SATPT.
3. Pull enough cable through the SATPT and through the antenna’s base seal to reach the
antenna.
4. Once enough cable has been pulled through fasten the SATPT to the arch, ensuring foam
Base Seal is positioned under the SATPT base.
5. With antenna sitting on it’s base seal, fasten the antenna to the top plate with the bolts
supplied and attach cable.


Produktspezifikationen

Marke: Scanstrut
Kategorie: Nicht kategorisiert
Modell: SATPT-40

Brauchst du Hilfe?

Wenn Sie Hilfe mit Scanstrut SATPT-40 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten