SE Electronics V Kick Bedienungsanleitung

SE Electronics Mikrofon V Kick

Lies die bedienungsanleitung für SE Electronics V Kick (16 Seiten) kostenlos online; sie gehört zur Kategorie Mikrofon. Dieses Handbuch wurde von 21 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 11 Bewertungen. Hast du eine Frage zu SE Electronics V Kick oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/16

V KICK • V BE AT • V CLAM P

U s e r M a n u a l

User Manual - EN

Thank you

We would like to thank you cordially for choosing this sE product! This manual contains some

important instructions for setting up and operating your new equipment. Please take a few minutes

to read the instructions below carefully. We hope you will enjoy working with it as much as we

enjoyed designing and building it for you.

Most Sincerely,

Your sE Team

Brief Descriptions

V KICK

The V KICK is a dynamic microphone intended for use with kick (bass) drums and other sources

such as miking bass guitar speaker cabinets, floor toms or other large drums where capturing low-

frequency energy is of the utmost importance. Its specialized capsule provides a sound character

tailored specifically for kick drums, which can be further shaped with the use of two switches on the

rear side of the microphone.

V BEAT

The V BEAT is a dynamic microphone intended for use with snare or tom drums, but it can also be

used on sources such as miking electric guitar speaker cabinets or brass instruments. Its

specialized capsule provides a highly detailed, natural sound character on snares or toms of any

size.

V CLAMP

The V CLAMP was designed to be the perfect companion for the V BEAT for snare or tom miking

purposes. Its sturdy elastic clamp enables setup and tear-down within seconds, and it fits any

popular snare or tom drum available.

Product Details

V KICK

The V KICK’s specialized capsule provides a sound character tailored

specifically for kick drums, which can be further shaped with the use of

two switches on the rear side of the microphone.

The left-hand switch shapes the microphone’s overall voicing, with two

selectable options:

“Classic” provides a more traditional kick drum sound with a familiar

low frequency punch and a warmer, more rounded sound. If a more

contemporary, aggressive sound is desired, the setting “Modern”

emphasizes the low end and high end (a “scooped” sound).

The right-hand switch specifically tailors the microphone’s high-frequency character:

“Classic” provides a typical bite in the upper midrange (presence boost) and a more rounded and

familiar sound, while provides an open, clear and transient-rich top end for a more HF “Modern”

contemporary, aggressive drum sound.

Each of these switches is recessed slightly into the mic body and requires a small flathead

screwdriver or similar implement to switch between settings.

The V KICK also has an integrated swivel joint that allows for easy

positioning inside or outside a kick drum. I extremely low profile allows ts

it to fit easily through the drum head port, and the XLR cable and mic

stand mount are in parallel to minimize cable clutter. Please remember

to securely tighten the swivel clamp whenever adjusting it, so as to

prevent the mic from sagging during a performance or recording.

V BEAT

The V BEAT’s ultra-compact design lets it occupy a minimal amount of space on your drum, without

interrupting lines of sight any more than necessary, and keeping it out of the way of drum sticks and

cymbals. With the XLR connector and stand mount on the bottom of the V BEAT and in parallel with

one another, the footprint and cable clutter are further minimized.

Its swivel mount also allows the

angle of the mic to be adjusted with

great precision, so it can be aimed at

almost any part of the drum head to

change the character of the sound,

and to minimize spill from other

drums or cymbals.

Please remember to securely tighten the swivel clamp whenever adjusting it, so as to prevent the

mic from sagging during a performance or recording.

V CLAMP

The V CLAM can be fitted to any popular snare or tom drum available P

by carefully stretching the elastic clamp over the drum rims to fit The .

height and rotation of the connected microphone can be changed by

loosening the V CLAMP’s knob and adjusting the position of the rod. This

allows the mic to be positioned perfectly for any desired drum tone, or to

minimize spill from nearby drums. The small hole at the bottom of the

rod can be used for a tie clip to attach a cable, or as a backup solution in

case the knob becomes loose for any reason.

Produktspezifikationen

Marke:	SE Electronics
Kategorie:	Mikrofon
Modell:	V Kick
Tiefe:	135 mm
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Typ:	Instrumenten-Mikrofon
Geräteschnittstelle:	XLR-3
Mikrofon-Frequenz:	20 - 19000 Hz
Mikrofon-Eingangsimpedanz:	300 Ohm
Durchmesser:	60 mm
Mikrofongewicht:	468 g
Minimale Abschlussimpedanz:	300 Ohm
Empfindlichkeit (1kHz):	0.2 mV/Pa