Seasonic Vertex GX-850 Bedienungsanleitung

Seasonic Nicht kategorisiert Vertex GX-850

Lies die bedienungsanleitung für Seasonic Vertex GX-850 (96 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Seasonic Vertex GX-850 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/96

POWER SUPPLY

INSTALLATION GUIDE

1. Remove your old PSU (power supply unit)

1.1. Disconnect your AC power cord

from the wall socket and the back of

the power supply.

1.2. Disconnect

all DC cable connectors.

1.3. Remove all 4 mounting screws.

1.4. Remove your old PSU.

WARNING! IMPORTANT SAFETY INFORMATION

• NEVER, under any circumstances, open the power supply

unit. High voltage inside. WARRANTY IS VOID once the

cover is removed.

• DO NOT insert any object into the fan grill or the ventilation

area of the power supply unit.

• DO NOT place any object in front of the fan or the

ventilation area of the power supply unit that may obstruct

or restrict airﬂow.

• USE ONLY the Seasonic modular cables provided with the

power supply unit.

• Keep the power supply unit in a dry environment, away

from humidity.

• The power supply unit is for integration into a computer

system and not intended for external or outdoor usage.

Warning!

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interfer ence received,

including interference that may cause undesired operation.

• Product: Switching Power Supply

• Model name: Please refer to the rating label on the product.

• Contact: www.seasonic.com/contact-us

BUMWHGUD3AW

2.1. Plug the AC power cord into the PSU. Make

sure that the AC power is coming directly from

the wall outlet.

2.3. If your power supply features a fan control

switch, set it to “Normal” Mode*.

* In Hybrid or Fanless Mode (S³FC) the fan will not turn.

It is recommended to use a high quality surge protector to

protect the PSU and the system.

** If you do not have a power supply tester, refer to the

paper clip method described below.

2.2. Connect both the 18-pin and 10-pin

connectors of the motherboard cable to the PSU.

2.4. If you have a Power Supply Tester**, attach

it to the 24-pin motherboard connector. There is

a notch on the Tester that helps to make a

perfect ﬁt with the 24-pin connector.

2.5. (Optional) For testing a Fanless PSU or a

PSU without the fan control switch, attach an

external fan or LED light using a Molex cable to

the PSU.

2.6. Turn on the power supply by

setting the I/O switch to the “I” (ON)

position.

The drawings illustrate a fully modular PSU with a fan control switch and a Power Supply Tester; the features and

accessories of your PSU might be dierent.

If the power supply fan starts

spinning (or the externally attached

LED light turns on), then your PSU

is working.

Power Supply Tester

10-pin Connector

18-pin Connector

2. Test your Seasonic PSU before installation

Use a paper clip or a

piece of wire to create

a short circuit on the

24-pin motherboard

connector by

connecting the pins

shown on the

illustration.

Paper clip method

Produktspezifikationen

Marke:	Seasonic
Kategorie:	Nicht kategorisiert
Modell:	Vertex GX-850
Breite:	150 mm
Tiefe:	160 mm
Mitgelieferte Kabel:	AC, CPU, PCIe, Peripheral (Molex), Peripheral (Molex) to SATA 3.3, SATA
Produktfarbe:	Schwarz
Höhe:	86 mm
Energieschutzeigenschaften:	Over current, Over power, Over voltage, Short circuit, Under voltage
Zweck:	PC
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Betriebstemperatur:	0 - 50 °C
Zertifizierung:	cTUVus, TUV, CB, CCC, BSMI, EAC, CE, Energy Star, RoHS, WEEE, ErP Lot 6, REACH
Verpackungsart:	Box
Ein-/Ausschalter:	Ja
Mittlere Betriebsdauer zwischen Ausfällen (MTBF):	150000 h
Nachhaltigkeitszertifikate:	CE, REACH, RoHS
Eingangsstrom:	11 - 5.5 A
Lüfterdurchmesser:	135 mm
Anzahl Lüfter:	1 Lüfter
Kühlung:	Aktiv
Gesamtleistung:	850 W
Kombinierter Strom (+3.3V):	125 W
Kombinierter Strom (+12V):	840 W
Kombinierter Strom (+5V):	125 W
Kombinierter Strom (-12V):	3.6 W
Kombinierter Strom (+5Vsb):	15 W
Max. Ausgangsstrom (+3.3V):	20 A
Max Ausgangsstrom (+5V):	20 A
Max. Ausgangsstrom (-12V):	0.3 A
Max. Ausgangsstrom (+5Vsb):	3 A
Motherboard Anschlussstecker:	20+4 pin ATX
Stromkabellänge Motherboard:	610 mm
Anzahl SATA Stromstecker:	4
SATA-Netzkabellänge:	950 mm
CPU Stecker (4+4 pin):	Ja
CPU-Leistung Kabellänge:	650 mm
Stromversorgungseinheit (PSU) Formfaktor:	ATX
ATX-Version:	3.0
Lagertyp:	FDB
80 Plus Zertifizierung:	80 PLUS Gold
Gewährleistungsfrist:	10 Jahr(e)
Anzahl Molex Anschlüsse 4pin:	1
Max. Ausgangsstrom (+12V):	70 A
Periphere (Molex) Netzkabellänge:	690 mm
Kabeltyp:	Vollständig modular
CPU P4 Verbinder (4-pin):	2
Kabelbinder enthalten:	Ja
ATX Stromstecker (20+4 pol.):	Ja