Seaward HAL:400 Bedienungsanleitung
Lies die bedienungsanleitung für Seaward HAL:400 (15 Seiten) kostenlos online; sie gehört zur Kategorie Messung. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 2 Bewertungen. Hast du eine Frage zu Seaward HAL:400 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/15
HAL:400
QUICK START GUIDE
PG 3
LIMITED WARRANTY & LIMITATION OF LIABILITY
SEAWARD Electronic Limited guarantees this product to be free from defects in material
and workmanship under normal use and service for a period of 2 years, provided the
instrument is serviced and calibrated by an authorised agent in accordance with the
manufacturer’s instructions. The period of warranty will be effective at the day of delivery.
Manufacturer does not provide any warranty for the following:
• Any normal wear and tear
• Errors or damage caused by: (i) misuse or not using your product in accordance with
the user guide, such as if the product has been exposed to moisture, to dampness or to
extreme thermal or environmental conditions or to rapid changes in such conditions,
to corrosion, to oxidation, to spillage of food or liquid or to influence from chemical
products, (ii) using your product with, or connecting it to, any product, accessory,
software, or service not manufactured or supplied by the manufacturer, (iii) any
products combined with your product by a third party, (iv) damage or errors caused
by hacking, cracking, viruses, or other malware, or by unauthorised access to services,
accounts, computer systems or networks; or (v) other acts beyond the manufacturer’s
reasonable control.
This Warranty is not valid:
• If your product, or the software it runs on, has been (i) opened, modified, or repaired
without the manufacturer’s authorisation, or (ii) repaired with unauthorised spare parts;
• If you have not installed the latest software updates that are publicly available for your
product within a reasonable time of their release; or
• If you refuse to give possession of the product to the manufacturer for repair and
investigation.
(c) Copyright 2024
All rights reserved. Nothing from this edition may be multiplied, or made public in any
form or manner, either electronically, mechanically, by photocopying, recording, or in
any manner, without prior written consent from SEAWARD Electronic Limited. This also
applies to accompanying drawings and diagrams.
Due to a policy of continuous development SEAWARD Electronic Limited reserves the
right to alter the equipment specification and description outlined in this publication
without prior notice and no part of this publication shall be deemed to be part of any
contract for the equipment unless specifically referred to as an inclusion within such
contract.
ENVIRONMENTAL CONDITIONS
The HAL:400 has been designed to perform tests and measurements in a dry
environment.
Overvoltage category II 300V.
Pollution degree 2 according to IEC 61010-1.
Protective system IP40 according to IEC 60529.
Electromagnetic compatibility (EMC). Interference immunity and emitted interference
conforming to IEC 61326-1, Class B.
USER NOTES
This instrument and its operating instructions are intended for use by adequately
trained personnel. Protective measures should be always considered when using
any HAL:400 unit. This quick start guide is not intended to be a substitute for the
operating manual, which should be read fully.
The following symbols are used in these operating instructions.
Warning of electrical danger!
Indicates instructions must be followed to avoid danger to persons.
Important, follow the documentation!
This symbol indicates that the operating instructions must be adhered to in order
to avoid danger.
Produktspezifikationen
| Marke: | Seaward |
| Kategorie: | Messung |
| Modell: | HAL:400 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Seaward HAL:400 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Messung Seaward
21 Juni 2025
16 April 2024
15 April 2024
28 Februar 2024
Bedienungsanleitung Messung
- Ermenrich
- REV
- Yato
- Gima
- Entes
- Oregon Scientific
- P3 International
- Bresser
- Voltcraft
- Laserliner
- Kemo
- Fluke
- Kübler
- AREXX
- Eltako
Neueste Bedienungsanleitung für -Kategorien-
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025