Sencor STR 210 Bedienungsanleitung

Sencor Papierschneider STR 210

Lies die bedienungsanleitung für Sencor STR 210 (28 Seiten) kostenlos online; sie gehört zur Kategorie Papierschneider. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Sencor STR 210 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/28

User‘s manual

Návod k obsluze

Návod na obsluhu

Használati útmutató

Instrukcja obsługi

Korisnički priručnik

Εγχειρίδιο Χρήστη

ROTARY TRIMMER

ROTAČNÍ ŘEZAČKA

ROTAČNÁ REZAČKA

ROTÁCIÓS PAPÍRVÁGÓ

OBCINARKA KRĄŻKOWA

SEKAČ ZA PAPIR

ROTACIJSKI REZAČ

ΠΕΡΙΣΤΡΟΦΙΚΟ ΚΟΠΤΙΚΟ

STR 210

SRL HR EL

EN-1 EN-2

Prescribed use

The rotary trimmer is designed for the creative cutting of paper, lm and other soft materials It is

possible to cut up to 5 sheets (80g/m

) at the same time.

Safety instructions

In case of any damages which are caused due to the failure to observe these

operating instructions, improper operation or the failure to observe the safety

instructions, the guarantee will expire.

● Do not carry the product at the cutting head.

● Do not overload the Paper Trimmer. Do not insert more sheets or stronger sheets than stated in

the Technical data.

● Do not touch the knife blades. Danger of injury!

● Please keep this operating manual for further reference!

● If you pass the device on to third parties, forward this operating manual as well.

Product description

The Paper Trimmer is equipped with the following features:

● transparent ruler with scale

● 3 di󰀨erent knifes for straight cut, wave-shaped cut and perforation of the paper

● cutting is possible in both directions

● additional scale on the base plate for straight and easy alignment of the material to be cut

The Paper Trimmer is equipped with the following features:

Do not touch the edge of knife blades. Danger of injury!

● Turn the cap at the cutting head towards „OPEN“ and remove it.

● Remove the knife.

● Take the desired knife out of its support at the bottom of the base plate and carefully remove the

blade protection.

● Insert the new knife into the cutting head. The axis of the knife must be inserted properly into the

receptacle of the cutting head.

● Place the cap back onto the cutting head and turn it towards „LOCK“ until it locks into place.

● Insert the replaced knife into the blade protection and place it into the support on the bottom of

the base plate.

Operation

Do not cut hard materials such as metal strips, glass etc.

Always operate the device with both hands. Use the device on a stable, at and

even surface only. Before each cut, check the knife in the cutting head for secure

fastening.

● Place the Paper Trimmer onto a non-slipping surface.

● Push the cutting head on one side of the ruler.

● Place the material to be cut with the cutting edge under the cutting ruler and bring it into the

desired position.

● Press the cutting ruler onto the material to be cut in order to x it and hold it with the other hand.

● Now, pull the cutting head in a constant movement and with slight pressure along the cutting

ruler.

Technical data

Cutting length max. 310 mm

Cutting type

Straight

Wave-shaped cut

Perforating cut

Cutting capacity max. 5 sheets (80g/m

)

Dimensions 382 × 55 × 120 mm

Weight 0.25kg

Warranty

A 24 month warranty is o󰀨ered to the trimmer. The warranty excludes wearing components.

Visit www.sencor.eu for details on other Sencor products.

Manufacturer: Fast ČR, a.s., Černokostelecká 1621, CZ 251 01 Říčany

2020, 11/2020

Produktspezifikationen

Marke:	Sencor
Kategorie:	Papierschneider
Modell:	STR 210
Breite:	382 mm
Tiefe:	120 mm
Gewicht:	250 g
Produktfarbe:	Schwarz
Höhe:	55 mm
Format:	A4
Schnittlänge:	310 mm
Ausschnittkapazität:	5 Blätter
Menge pro Behälter:	1 Stück(e)
Messskala:	Ja
Klemmplatte Typ:	Handklemme