Sharp XR-10S Bedienungsanleitung
Sharp
Videostrahl
XR-10S
Lies die bedienungsanleitung für Sharp XR-10S (68 Seiten) kostenlos online; sie gehört zur Kategorie Videostrahl. Dieses Handbuch wurde von 45 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 23 Bewertungen. Hast du eine Frage zu Sharp XR-10S oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/68

MULTIMEDIA PROJECTOR
MODEL
XG-MB55X
XR-20X/XR-20S
XR-10X/XR-10S
OPERATION MANUAL
Introduction Quick Start Setup Connections Basic
Operation
Useful
Features Appendix

ii
IMPORTANT
• For your assistance in reporting the loss
or theft of your Projector, please record
the Model and Serial Number located on
the bottom of the projector and retain this
information.
• Before recycling the packaging, please
ensure that you have checked the con-
tents of the carton thoroughly against the
list of “Supplied accessories” on page 10.
Model No.:
Serial No.:
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporat-
ing a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362
fuse marked or and of the same rating as above, which is also indicated on the pin
face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse
cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug
supplied, cut off the mains plug and fit an appropriate type.
DANGER:
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immedi-
ately and disposed of in a safe manner.
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket
outlet, as a serious electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:
WARNING:
THIS APPARATUS MUST BE EARTHED.
IMPORTANT:
The wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow : Earth
Blue : Neutral
Brown : Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in your plug proceed as follows:
•The wire which is coloured green-and-yellow must be connected to the terminal in the
plug which is marked by the letter E or by the safety earth symbol or coloured green or
green-and-yellow.
•The wire which is coloured blue must be connected to the terminal which is marked with
the letter N or coloured black.
•The wire which is coloured brown must be connected to the terminal which is marked with
the letter L or coloured red.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.

iii
Produktspezifikationen
Marke: | Sharp |
Kategorie: | Videostrahl |
Modell: | XR-10S |
Marktpositionierung: | Tragbar |
Gewicht: | 3900 g |
Übertragungstechnik: | Kabelgebunden |
Fernbedienung enthalten: | Ja |
Display: | LCD |
Kontrastverhältnis: | 2000:1 |
Geräuschpegel: | 33 dB |
Netzteiltyp: | 100~240V |
Full-HD: | Ja |
Abmessungen (BxTxH): | 315 x 109 x 280 mm |
Projektorhelligkeit: | 2000 ANSI Lumen |
Projektionstechnologie: | LCD |
native Auflösung des Projektors: | SVGA (800x600) |
Nachhaltigkeitszertifikate: | ENERGY STAR |
Lampenleistung: | 275 W |
Typ der Lichtquelle: | Lampe |
Weitere Anschlüsse: | 2 x RGB\n1 x Video\n1 x S-video\n2 x Audio (3.5 mm)\n1 x Seral RS-232C (9-pin mini DIN) |
Objektiv-System: | DLP |
Display-Auflösung: | 800 x 600 Pixel |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Sharp XR-10S benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Videostrahl Sharp
2 Mai 2024
22 April 2024
19 April 2024
3 April 2024
21 März 2024
17 Februar 2024
4 Dezember 2023
18 November 2023
19 August 2023
25 Juni 2023
Bedienungsanleitung Videostrahl
Neueste Bedienungsanleitung für -Kategorien-
13 August 2024
9 August 2024
9 August 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024
25 Juni 2024