Shure MX395 Bedienungsanleitung
Lies die bedienungsanleitung für Shure MX395 (9 Seiten) kostenlos online; sie gehört zur Kategorie Mikrofon. Dieses Handbuch wurde von 9 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 5 Bewertungen. Hast du eine Frage zu Shure MX395 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/9
1/9
MX395 -- Low-Profile Boundary Microphone
General Description
Shure MX395 low-profile microphones are for use in boardrooms and other sites where aesthetics are important.
The MX395 is only 2.5 cm (1 in.) in diameter, and extends just 2 cm above the mounting surface when installed.
Despite its small size, the MX395 delivers clear, high quality sound.
Features
•Low profile, aesthetic design
•Wide dynamic range and smooth frequency response
•RF filtering with CommShield technology
•Available with logic-controlled bi-color status indicator
Model Variations
The MX395 is available in cardioid, omnidirectional, and bidirectional polar patterns, with or without an LED status
indicator, with a black, white, or aluminum finish.
Polar Patterns
The polar pattern is indicated by the molded grille.
Microphone Placement
For best low-frequency response and rejection of background noise, place the microphone on a large, flat surface,
such as a floor, table, or lectern.
To reduce reverberance, avoid reflective surfaces above or to the side of the microphone, such as beveled sides
of pulpits or overhanging shelves.
®
®
Shure Incorporated
2/9
DIP Switches
Set DIP Switch 1 up to engage the low cut filter, which attenuates frequencies by 6 dB per octave below 150 Hz.
Switch Down (default) Up
1 Full frequency response Low cut filter
2 -- --
Installation
Install the microphone into a tabletop as shown.
Important:
•Align indentation toward talker
Shure Incorporated
3/9
•Do not over tighten the wing nut, as this reduces shock isolation
LED Logic
For models equipped with an LED, use the included 5-pin XLR connector to wire the microphone to an automatic
mixer or other logic device.
Note: Connect the LED IN to the gate output to illuminate the LED when the channel is gated on.
Do not use the relay ports on Crestron and AMX devices. Use the I/O logic ports instead.
The LED logic may not function when connecting to devices that do not have internal "pull-up resistor" logic cir-
cuits, such as ClearOne DSP products. External pull-up resistor circuits can be added for each microphone. Vistit
www.shure.com/FAQ for detailed instructions.
Logic Connection
Connection to device with internal "pull-up resistor" logic circuit
Produktspezifikationen
| Marke: | Shure |
| Kategorie: | Mikrofon |
| Modell: | MX395 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Shure MX395 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Mikrofon Shure
21 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
10 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
9 Juli 2025
Bedienungsanleitung Mikrofon
- American Audio
- Technaxx
- Wharfedale
- Triton
- Scope Labs
- TeachLogic
- Sony
- Pure Acoustics
- Thronmax
- Bontempi
- Warm Audio
- United
- TC Helicon
- KeepOut
- Nowsonic
Neueste Bedienungsanleitung für -Kategorien-
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
31 Juli 2025
30 Juli 2025
30 Juli 2025
29 Juli 2025