Shure SM137 Bedienungsanleitung

Shure Mikrofon SM137

Lies die bedienungsanleitung für Shure SM137 (6 Seiten) kostenlos online; sie gehört zur Kategorie Mikrofon. Dieses Handbuch wurde von 12 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 6.5 Bewertungen. Hast du eine Frage zu Shure SM137 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/6
1/6
SM137 -- Instrument Microphone
General Description
The Shure SM137 is a versatile, flat-response cardioid probe microphone with an ultra-thin diaphragm. Its fre-
quency response combines smooth high-end and tight, controlled low-end. A 15 dB pad provides natural, consis-
tent sound reproduction in both acoustic and high-volume performance applications.
Features
Performance Characteristics
Extremely uniform polar response
Extended frequency response
Minimal self-noise
Exceptional low-frequency reproduction
Able to withstand high SPLs
High output level
No crossover distortion
Superior common-mode rejection and suppression of radio frequency interference (RFI)
Applications
Brass and woodwind instruments
Orchestras, choirs, and wind ensembles
Overhead miking of drums and percussion instruments
Close-miking of acoustic instruments such as piano, guitar, violins, drums, and percussion
Low-frequency instruments such as double bass and kick drum
Electric guitar and bass amplifiers
Vocals and speech
Room ambience
Note: Sound quality is strongly affected by microphone location and room acoustics. To achieve the best overall
sound for a particular application, it may be necessary to experiment with microphone placement and room
treatments.
®
Shure Incorporated
2/6
Mounting the Microphone
Use the supplied microphone mount with floor or boom stands. Visit www.shure.com for more mounting options:
To reduce the pickup of unwanted low-frequency mechanical vibrations, use an isolating shock mount.
For stereo applications, use the optional Shure A27M Stereo Microphone Adapter.
Setting Attenuation
The attenuation switch lets you reduce the signal level without altering the frequency response. This can prevent
extremely loud sounds from overloading the microphone.
0 dBFor “quiet” to “normal” sound levels.
-15 dB For use with extremely loud sound sources such as drums, horns, or loud guitar
cabinets.
Integral Pop Filter
The microphone grille consists of 3 separate mesh layers that act as an integral pop filter. This helps reduce wind
and breath noise. Depending on the performer, an external pop-protection screen or windscreen may be neces-
sary when close-miking vocalists.
Load Impedance
Maximum SPL capability, output clipping level, and dynamic range vary with the input load impedance of the pre-
amplifier to which you connect the microphone. Shure recommends a minimum input load impedance of 1000 Ω.
Most modern microphone preamplifiers meet this requirement. Higher impedance results in better performance for
these specifications.
Power Requirements
This microphone requires phantom power and performs best with a 48 Vdc supply (IEC-61938). However, it will
operate with slightly decreased headroom and sensitivity with supplies as low as 11 Vdc.
Most modern mixers provide phantom power. You must use a microphone cable: XLR-to-XLR or XLR-balanced
to-TRS.
Specifications
Type
Electret Condenser
Frequency Response
20 to 20,000 Hz
Shure Incorporated
3/6
Polar Pattern
Cardioid
Output Impedance
150 (actual) Ω
Sensitivity
(at 1 kHz, open circuit voltage)
-41 dBV/Pa
Maximum SPL
(1 kHz at 1% THD)
1000 Ω load dB dB139 (154 , PAD ON)
2500 Ω load dB dB144 (159 , PAD ON)
Signal-To-Noise Ratio
(Ref. 94 dB SPL at 1 kHz)
75 dB
Dynamic Range
(at 1 kHz)
1000 Ω load dB120
2500 Ω load dB125
Common Mode Rejection
(10 Hz to 100 kHz)
>50 dB
Clipping Level
(20 Hz to 20 kHz, at 1% THD )
1000 Ω load dBV3
2500 Ω load dBV9
Self Noise
(typical, equivalent SPL, A-weighted)
19 dB
[1]
[2]
[3]


Produktspezifikationen

Marke: Shure
Kategorie: Mikrofon
Modell: SM137

Brauchst du Hilfe?

Wenn Sie Hilfe mit Shure SM137 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten