Siemens N2264 Bedienungsanleitung
Siemens
Thermostat
N2264
Lies die bedienungsanleitung für Siemens N2264 (12 Seiten) kostenlos online; sie gehört zur Kategorie Thermostat. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 14 Bewertungen. Hast du eine Frage zu Siemens N2264 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/12
CE1N2264en
23.04.2002
Siemens Building Technologies
HVAC Products
2264
Self-learning Room
Temperature Controller REV23
5 operating modes, heating / cooling functions and menu selection via roller selector
• Mains-independent room temperature controller
• Straightforward, self-explanatory menu selection via roller selector
• Self-learning 2-position controller providing PID mode (patented)
• Choice of operating modes:
automatic with maximum 3 heating or cooling periods, continuously comfort
mode, continuously economy mode, frost protection with one 24-hour operat-
ing mode and one heating or cooling period
• In automatic mode, one temperature setpoint can be adjusted for each heating
or cooling period
• Control of cooling equipment
Use
For the control of the room temperature in:
• Apartments, single-family or holiday houses
• Offices, individual rooms, consulting rooms or commercially used spaces
For control of the following pieces of equipment:
• Solenoid valves of instantaneous water heaters
• Solenoid valves of atmospheric gas burners
• Forced draft gas or oil burners
• Circulating pumps in heating systems, zone valves
• Electric direct heating systems or fans of electric storage heaters
• Thermic actuators
• Cooling and refrigeration equipment
2/12
Siemens Building Technologies Room Temperature Controller REV23 CE1N2264en
HVAC Products 23.04.2002
Functions
• PID mode with self-learning or selectable switching cycle
• 2-position control
• Automatic mode with 7-day switching program for 24-hour, working day, weekend or
7-day operation with up to 3 heating or cooling periods per day
• One temperature setpoint for each heating or cooling period
• One 24-hour operating mode with one heating or cooling period
• Remote operation
• Override button
• Sensor calibration and reset function
• Frost protection function or overtemperature protection
• Limitation of the minimum setpoint
• Holiday mode
• Heating or cooling mode
• Periodic pump run
• Optimum start control for the first heating period
Ordering
Room temperature controller with 7-day time switch REV23
When ordering, please give the type reference.
The controller is supplied complete with batteries.
Technical design
Display and
operating elements
Operating elements
Selection of operating mode
Warmer button
Colder button
Override button
Roller selector for the menu, submenu and settings
Confirm by pressing
Leaving the current menu level and returning to the menu level
previously active (the settings currently displayed will be ac-
cepted)
3/12
Siemens Building Technologies Room Temperature Controller REV23 CE1N2264en
HVAC Products 23.04.2002
Display
Time of day
° C Room temperature
Change batteries (display appears about 3 months before bat-
teries are exhausted)
Remote operation active
Holiday mode active
Selection of operating mode (only one operating mode is activ)
Automatic mode
Comfort mode
Economy mode
Frost protection or overtemperature protection
24-hour mode with one heating or cooling period
(heating or cooling period is automatically generated from the
current 24-hour program)
Temporary change of the current setpoint temperature
(change only active until the next switching point is reached)
° C When pressing the + or – button once, the adjusted setpoint
temperature will be displayed. It can be readjusted in incre-
ments of 0.2 °C (max. +/- 4 °C).
Override button
In operating modes and , this button can be used to switch from comfort
to economy temperature, or vice versa. The selection is maintained until the
next switching point is reached or until the operating mode is changed.
Menu-driven user settings: 4 main menus available
Time of day and day Main menu Submenu Settings
hCurrent time of day
Current day of week
Temperature Main menu Submenu Factory settings – heating / cooling
T Setpoint comfort mode 19 °C 23 °C
Setpoint economy mode 16 °C 29 °C
Setpoint frost
or overtemperature protection 5 °C 35 °C
Produktspezifikationen
| Marke: | Siemens |
| Kategorie: | Thermostat |
| Modell: | N2264 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Siemens N2264 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Thermostat Siemens
16 Oktober 2024
7 Oktober 2024
5 Oktober 2024
3 September 2024
1 September 2024
30 August 2024
30 August 2024
29 August 2024
28 August 2024
28 August 2024
Bedienungsanleitung Thermostat
- THERMAFLEX
- Gira
- Schwaiger
- Noma
- Meross
- Hama
- Lowes
- Vemer
- Carel
- Vasco
- Taurus
- VDH
- Nefit
- Danfoss
- Heatmiser
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025
14 Juni 2025
14 Juni 2025
12 Juni 2025
12 Juni 2025
12 Juni 2025
8 Juni 2025