Siemon VP-BLNK Bedienungsanleitung
Seiten 1 Engels Nicht kategorisiert
Lies die Bedienungsanleitung für Siemon VP-BLNK kostenlos online oder lade das PDF herunter. 22 Personen fanden diese Anleitung hilfreich. Frage zu diesem Modell? Stelle eine Frage
To assist safe installations, comply with the following:
A. Use caution when installing or modifying
telecommunications circuits.
B. Never touch uninsulated wire terminals unless
the circuit has been disconnected.
C. Never install this device in a wet location.
D. Never install wiring during a lightning storm.
VPOD Blank Panel Installation Instructions
Parts DescriptionRequired Tools
Rev. A 10/08 100.17753.00
To assist safe installations, comply with the following:
A. Use caution when installing or modifying
telecommunications circuits.
B. Never touch uninsulated wire terminals unless
the circuit has been disconnected.
C. Never install this device in a wet location.
D. Never install wiring during a lightning storm.
Make sure both cabinets
that the Blank will be
installed between, are level and
properly bayed together using all
(4) baying brackets. See Baying
Instructions.
1Install the (4) shoulder
bolts provided onto the
inside of the VPOD Frame as
shown, using the 5/32” Allen Tool.
(2) bolts on the top and (2) bolts
on the bottom.
2Place the Blank over the (4)
shoulder bolts and hook
the back plate into place.
3
© 2008 Siemon
Global Headquarters
Watertown, Connecticut USA
Tel: (1) 866-548-5814
For a complete listing of our global offices visit our web sitewww.siemon.com
5/32 Allen Tool
VPOD Vertical Blank Panel
(4) Shoulder Bolts
Produktspezifikationen
| Marke: | Siemon |
| Kategorie: | Nicht kategorisiert |
| Modell: | VP-BLNK |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Siemon VP-BLNK benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten