Siig CE-H22811-S1 Bedienungsanleitung

Siig AV extender CE-H22811-S1

Lies die bedienungsanleitung für Siig CE-H22811-S1 (8 Seiten) kostenlos online; sie gehört zur Kategorie AV extender. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 12 Bewertungen. Hast du eine Frage zu Siig CE-H22811-S1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/8
1
Introduction
The HDMI Over Gigabit IP Extender Kit with IR extends
HDMI signal over one Cat5/6 cable up to 330ft.
Features and Benefits
Extend HDMI signals up to 100m over Cat5e/6
cabling
Supports video high resolution Full HD 1080p, 1920
x 1080
IR (Infrared Remote) pass-through enabled
High Definition Audio (HD) Surround Sound
Metal housing with mounting mechanism
Package Contents
CE-H22811-S1
04-0958A
HDMI Over Gigabit IP
Extender Kit with IR
Installation Guide
2
Layout
Transmitter Unit (Tx)
Figure 1: Transmitter side panel
DC 5V: DC 5V power jack. Plug the included power
adapter here
PWR: LED indicator for power status. On/Off when
the Transmitter is powered on/off
LINK: LED indicator for link status. On when the
connection between the Transmitter and Receiver is
established
CE-H22911-S1
3
HDMI IN: HDMI signal input port. Connect this
port to your HDMI source device by using an HDMI
cable (not included)
LINE: Signal output port, connected with Receiver's
LINE port by using a CAT X cable (not included)
IR: Connect to the included IR blaster cable
Receiver/Repeater Unit (Rx)
Figure 2: Receiver/Repeater side panel
DC 5V: DC 5V power jack. Plug the included power
adapter here
IR: Connect to the included IR receiver cable
PWR: LED indicator for power status. On/Off when
the Receiver/Repeater is powered on/off
LINK: LED indicator for link status. On when the
connection between Transmitter and Receiver is
established
HDMI OUT: HDMI signal output port. Connect
this port to the remote HDMI display by using an
HDMI cable (not included)
LINE: Signal input port, connected with Transmitter's
LINE port by using a CAT X cable (not included)


Produktspezifikationen

Marke: Siig
Kategorie: AV extender
Modell: CE-H22811-S1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Siig CE-H22811-S1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten