SilverStone XAC-MK-TR5 Bedienungsanleitung

Lies die bedienungsanleitung für SilverStone XAC-MK-TR5 (1 Seiten) kostenlos online; sie gehört zur Kategorie PC Kühlventilator. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.6 Sterne aus 3 Bewertungen. Hast du eine Frage zu SilverStone XAC-MK-TR5 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

XAC-MK-TR5

www.silverstonetek.com

User manual

G11253940

1.Remove the protection cover of thermal interface material (TIM) or thermal grease. The

required amount of TIM has been pre-applied on the bottom of the heat sink.

2.Place the heat sink directly on top of the CPU (Figure 1) so that the four heat sink

mounting screws are aligned with and seated on the four heat sink mounting studs or nut

standoffs on the socket stiffener frame.

3.Use a screwdriver with Torx T20 bit and adjust the screwdriver torque setting to 12.5~15.0

kgf-cm (10.8~13.0 lbf-in). Before turning on the screwdriver, make sure that the screwdriver bit is

fully engaged in the cavity of the heat sink mounting screw head. Keep heat sink mounting

screw vertical during installations.

4.Tighten the two diagonal heat sink mounting screws, i.e. the #1 and #2 screws (Figure 2),

Then do the same with the remaining two diagonal heat sink mounting screws.

5.Follow the diagonal installation pattern on all four heat sink mounting screws to ensure

that the bottom of the heat sink is properly seated on the CPU and to prevent the heat sink from

tilting.

Figure 1

Figure 2

NO.1 Screw

NO.2 Screw

NO.3 Screw

NO.4 Screw

Produktspezifikationen