Skagen Anita Bedienungsanleitung
Skagen
betrachten
Anita
Lies die bedienungsanleitung für Skagen Anita (14 Seiten) kostenlos online; sie gehört zur Kategorie betrachten. Dieses Handbuch wurde von 14 Personen als hilfreich bewertet und erhielt im Schnitt 3.8 Sterne aus 7.5 Bewertungen. Hast du eine Frage zu Skagen Anita oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/14
InstructIons and care
Skagen suggests the following solutions for cleaning metal and crystal surfaces:
3:1 solution of ammonia based window cleaner to water
4:1 solution of rubbing alcohol to water.
*Do not use soap products, soap will leave residue behind when dry.
These suggested solutions will evaporate cleanly from metal and glass surfaces.
To clean the case and crystal:
Moisten a soft cloth with one of the above solutions. Gently wipe the case and
crystal clean. Be careful not to put too much stress on the crystal as you clean. Avoid
immersing or soaking the case or crystal portion of the watch, regardless of water
resistance rating.
To clean the band or strap:
Metal: Dip a cotton swab into the above solution and gently rub it on the unclean
area of the band. For more intricate mesh bands, you may want to use a soft bristle
toothbrush or nailbrush. Be sure to cover the case of the watch during this process so
as not to soak it. For stubborn dirt, you may want to take your watch in to the nearest
Skagen location.
Silicon, Felt and Ceramic: Simply wipe the strap down with a damp, soft cloth. Avoid
soaps and solvents as they may damage the material.
Leather: Simply wipe it clean with a damp cloth, using water only. You may want to
use leather conditioner or a small amount of hand lotion to keep the leather supple
over time. Top grain leather may develop a milky “haze” if left alone for extended
periods. This can simply be wiped away or removed with leather conditioner. A
product called “nubuck eraser” can be used to remove light stains and debris from the
inside of the strap.
WATCH CARE
TO ADJUST THE BAND: LIFT – SHIFT - PRESS
1. Position a athead screwdriver or other adjustment tool in the slot on the clasp.
Lift the bar in the direction facing away from the straight pin.
IMPORTANT: Ensure that the tool handle points toward the watch case.
Pressing the adjustment tool against the straight pin may bend and destroy the pin.
2. Shift the adjustable buckle to the desired position. Clasp must be placed in one of the
adjustment indentations on the back of the band.
3. Press the slotted clasp closed.
ShiftLift Press
1 2 3
TO SECURE THE BAND: HOOK – SNAP - CLASP
Pull the hook over the pin, snap the at clasp closed, then close the
security clasp.
1 2 3
SnapHook Clasp
Mesh Band adjustMent
InstructIons
Produktspezifikationen
| Marke: | Skagen |
| Kategorie: | betrachten |
| Modell: | Anita |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Skagen Anita benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung betrachten Skagen
9 September 2024
1 September 2024
10 August 2024
6 August 2024
1 August 2024
Bedienungsanleitung betrachten
- Raketa
- Pulsar
- Calypso
- DMC
- Ebel
- Orient
- Renkforce
- Velleman
- Braun
- Girard-Perregaux
- Kalenji
- Zenith
- Spinnaker
- HYT
- Lotus
Neueste Bedienungsanleitung für -Kategorien-
9 Oktober 2024
7 Oktober 2024
7 Oktober 2024
6 Oktober 2024
6 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024
