SkyRC BD200 Bedienungsanleitung
SkyRC
Nicht kategorisiert
BD200
Lies die bedienungsanleitung für SkyRC BD200 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2 Bewertungen. Hast du eine Frage zu SkyRC BD200 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2
1. Connect battery to BD200
INTRODUCTION
OPERATION
-1- -2-
INSTRUCTIONMANUAL
SK-600123
BATTERY DISCHARGER & ANALYZER
FEATURES
It displays real time battery voltage, discharged capacity and discharge current.
It can test battery capacity that helps select batteries with desired capacity.
It saves time when user wishes to store their large capacity batteries.
It helps activate the best performance of your batteries for competition.
Thank you for choosing the SkyRC Battery Discharger & Analyzer (BD200). The BD200 is a powerful
discharging device that allows the user to discharge a battery at up to 30 amps or 200 watts and also
measures and compares the performance of batteries. BD200 allows for the precise measurement of
battery capacity and takes the guesswork out of choosing the best battery for your application.
The BD200 is much more than a simple battery discharger or a battery load tester. It will test virtually any
type or size of battery, any chemistry or number of cells, up to 35 volts.
The BD200 is ruggedly built and uses XT60 connector for battery connection. It is small with a high
performance cooling system. Digital LED indicates battery voltage, discharge capacity and discharge current.
2. Power ON
Press the dial once to
power ON the discharger,
the LED(V/mAh) will
blink with beep sound.
3. Select cut-off voltage and discharge current
By rotating the dial to change cut-off voltage, then press dial once to confirm.
By rotating the dial to change discharge current.
V / mAh V / mAh
A A
4. Start discharging process.
Press and hold dial for 2 seconds, the discharger will start with
beep sound.
During the discharging process, the digital LED(V/mAh) will
alternate the display of battery voltage and discharging capacity.
V / mAh V / mAh
6. Process finished.
When the discharging process has finished, the discharger will beep 5 times, and the LED(V/mAh)
will show battery voltage and discharge capacity respectively.
Digital LED(V/mAh)
Battery Voltage
/ Capacity Display
Digital LED(A)
Current Display
Rotary Dial
for Setting Cutoff Voltage
Discharging Current
Start/Stop Button
Temperature Controlled
Cooling Fan
XT60 Battery
Port
DataLink
Heat Sink
The LED(V/mAh) shows the current battery voltage.
Current Display Accuracy:
Voltage Display Accuracy:
Capacity Display Accuracy:
Dimension:
Weight:
0.01-10.00A ±60mA
10.00-30.00A ±2%
5.4-10V ±60mV
10-20V ±120mV
20-35V ±160mV
±3%
136.6x104.8x96mm
858g
SPECIFICATION
Accepted Voltage Range: 5.40-35.00V
Low Voltage Alert: <5.2V
High Voltage Alert: >35V
Max. Discharge Power: 200W
Discharge Current Range: 0.01A-30.00A
Current Consumption in Sleep Mode: <100uA
Standby Current: ≤35mA
5. Stop discharging process.
A
During the discharging process, Press the dial once to stop the
discharging process, the digital LED(A) shows “Stop”.
Produktspezifikationen
| Marke: | SkyRC |
| Kategorie: | Nicht kategorisiert |
| Modell: | BD200 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit SkyRC BD200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert SkyRC
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026
16 Dezember 2025
16 Dezember 2025
Bedienungsanleitung Nicht kategorisiert
- Luna Optics
- GAM
- Uwatec
- Gen Energy
- HIOAZO
- Metalux
- Winegard
- Bikemate
- Amazon
- Canary
- Mountfield
- Pivo
- SI-TEX
- Spectra Cine
- Smith & Wesson
Neueste Bedienungsanleitung für -Kategorien-
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
21 Januar 2026
20 Januar 2026
20 Januar 2026
20 Januar 2026