Smanos FD2100 Bedienungsanleitung
Smanos
Sicherheit
FD2100
Lies die bedienungsanleitung für Smanos FD2100 (15 Seiten) kostenlos online; sie gehört zur Kategorie Sicherheit. Dieses Handbuch wurde von 29 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 15 Bewertungen. Hast du eine Frage zu Smanos FD2100 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/15

© 2015 SMANOS HOLDING LTD. All Rights Reserved.
Printed in China
Ver: FD2100-UM-ML-V1.0
FD2100
Wireless Water Detector
MULTILINGUAL
USER MANUAL
EN DE ESFR PTNL IT

EN EN
Introduction
This is a contact wireless water detector, which works based on the
theory of liquid conductivity. The performance is reliable and the
installation is easy. When the liquid reaches to the two probes of the
detector, it will send wireless signal to the control panel. It can be
widely used in computer rooms, warehouses and any places need
to be protected from water. Two pieces of AAA 1.5V LR03 batteries
are included in the detector, which enables 12 months standby.
Product Overview
LED Indicator
Transmitter
Probe
LED Indication
Flash once: Liquid is detected, sending wireless signal to the control
panel.
Flash once every two seconds: Low battery. Please replace the
battery immediately.
PCB Layout
AAA 1.5V LR03
AAA 1.5V LR03
Tamper Switch
Connect to the Control Panel
Make sure the control panel is under learning status, then simulate
an alarm case by touching the probe of detector with the water.
When an alarm signal is received by panel, one beep is heard,
indicating a successful connection.

EN EN
Installation
1. Remove the insulated strip, the detector will enter working mode.
2. Use screw to x the probe horizontally on the detection site.
3. Use double-sided adhesive tape to x the transmitter on the place
where the liquid is normally unable to reach, and keep the antenna
upward.
Change Batteries
Open the back case with screwdriver, and replace the batteries with
new ones according to the positive and negative marks.
Specications
Power supply: DC 3 V (AAA 1.5 V LR03 x 2 PCS)
Static current: < 29 uA
Alarm current: < 23 mA
Transmitting distance: < 80 m (in open area)
Radio frequency: 868 MHz
Housing material: ABS plastic
Operating condition:
Temperature: 0 °C ~ +55 °C
Relative humidity: < 80% (non-condensing)
Detector dimensions (L x W x H): 54 x 14.5 x 107 mm
Probe dimensions (L x W x H): 35 x 30 x 15 mm
Produktspezifikationen
Marke: | Smanos |
Kategorie: | Sicherheit |
Modell: | FD2100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Smanos FD2100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Sicherheit Smanos
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
Bedienungsanleitung Sicherheit
- Fito
- Velleman
- Eufy
- Ksenia
- Ajax
- Golmar
- Storex
- Gira
- Brennenstuhl
- Friedland
- Ednet
- Powerfix
- Woonveilig
- Iiquu
- PIR Alarm
Neueste Bedienungsanleitung für -Kategorien-
5 Oktober 2024
24 September 2024
20 September 2024
19 September 2024
17 September 2024
17 September 2024
16 September 2024
16 September 2024
27 August 2024
27 August 2024